SOLD. Going to Miss my Baby. Hope you enjoy the car Clive

Engine Setup
Stage 1 conversion Thanks to Steves Auto Clinic in Kyalami
==Dastek Unichip performance chip (Piggyback system)
==Performance branch (page 2)
==Stainless steel free flow exhaust system (page 2)
==Custom Chrome Muffler (page 2)
==Gas Flowed Inlet Manifold
==103.3kw (138.53HP) @ 5889 RPM on the dyno.
To Convert HP to KW and KW to HP use the following formula:
»»Power (kW) = Power (HP) x 0.7457
»»Power (HP) = Power (kW) x 1.341
Or go to the follwing link WEN Technology

Rims and Tyres
Thanks to Craig at Tiger Wheel and Tyre Alberton for the great Discount
==Imported 18' RACINGHART Concept Rims
==Nitrogen in the tyres
==Nancook Tyres

Rims went in on the 20 June 2006, giving the rims a mirror finish polish and clear coat spray soon at Hi Tech Mag Repairs Alberton. Thanks Quinten.

Feel free to email me adrianMX6@yahoo.co.uk

Thanks to Steves Auto Clinic. First time dyno produced results of 87kw. LOL
After the stage 1 conversion the dyno showed results of 102.2kw
SACs found a cracked injector that was sucking air. Since replacing that small problem the dyno now shows results of 103.3kw.

My son cant wait till he is big enough to drive the MX6. Nothing wrong with a young start.

MX6 Forum

Please sign the guest book. Any and all decent comments are welcome. No haters!!

Replaced the water pump (June 2006), and power steering boots and rubbers. Flushed the breaking system piping, replaced a faulty injector, major service and a dyno tune up again.
AfricaAdrian on MX6 Forum