This page, as well as the sound system, is under construction. I will be updating this page quite often until the sound system is done. This page will show you most of the parts that I intend on using. Page 5 will show the installation as it happens.
I've collected most of what I plan on using for the sound system. I still have some speakers and an electronic eq to get.
I recently picked up two JL Audio 10W6v2-D4's and a 1000/1 amp.
JL Audio Slash Series Amps 1000/1 and two 300/2's.
I just got the main speakers. ZR650-Csi's
PPI FRX-322 Crossover
Banana plug posts which will be used for the sub box.
I have some Q-Logic kick panels that I might use. I'm not impressed with these so I might custom make my own.
I will upgrade the battery terminals and wires at some point in time. These will give me a good starting place.
Starting off the install will be a couple days of sound dampening.
Sub and 6.5 inch midbass
Lots of wire loom
Steering Wheel Interface
Here are some things I purchased right here from cardomain.
Scosche Face Plate Kit, Antenna Adapter, and Wiring Harness and Streetwires CBR44S Fused Distribution Block and MIDI fuses
Wire and Interconnects
Grounding terminal
More pictures coming soon.
List of parts:
1 JL Audio 1000/1 Slash Series Amp
2 JL Audio 300/2 Slash Series Amps
2 JL Audio 12W6v2-D4 Subs
2 JL Audio XR650CW's
1 Precision Power FRX-322
JL Audio ZR650-Csi's
4' 1/0 gauge Stinger clear wire
1.5' 1/0 gauge Stinger clear wire
3 Rolls of Raammat BXT
7 Yards of Ensolite
Sub Box Terminals: HD Binding Posts (these are awesome!)
Dayton BAGS-G banana speaker plugs
1/0 in-line fuse holder and 200 Amp ANL
Ground Terminal: Streetwires GTO
Face Plate Kit Scosche CR1277
Antenna Adapter Scosche CRA
Wiring Harness Scosche CR02
Distribution Block (fused) Streetwires CBR44S
Fuses:
- 100 Amp MIDI
- 40 Amp MIDI
Grommets Stinger PG34
Positive Battery Terminal Stinger HPM Digital SHBTPM
Negative Battery Terminal Stinger HPM Digital SHBTN
RCA Cables:
- 3 sets of 3 ft Streetwires ZN3.5
- 3 sets of 12 ft Streetwires ZN2.0
Speaker Cables:
Stinger Expert SXSW10 Silver
Stinger Expert SXSW14 Silver
Sony CDX M8815X head unit
Wire connectors:
- Ring Terminal for battery to chassis Stinger HPM Series
Ground Wires: 4 gauge Clear Stinger SHPM4
Power Wire: 4 gauge Red Stinger SCPR04
Power Wire: 0 gauge Red
- From battery post to Distribution Block 10’
wire loom (lots of it)
PAC SWI-PS
Stock kick panels (in case I want to make custom kicks)
List of items on order:
List of items still needing to be done:
1. Optimal Yellow Top Battery D34/78
2. Ground Wire: 0 gauge Clear Stinger SHPM0
- From battery post to lower frame 30”
3. Ground Wires: 4 gauge Clear Stinger SHPM4
- From battery post to upper frame 18”
- From battery post to engine block 36”
- From chassis to engine block ?”
4. Power Wire: 4 gauge Red Stinger SCPR04
- From battery post to fuse/relay center 30”
- From battery post to starter 42”
- From fuse/relay center to alternator 48”
- From Alternator to battery ?”
- From battery to fuse box ?”
- From battery to solenoid ?”
5. Battery Side Port Terminal Stinger HPM Series
6. Electronic Equilizer
Page 1: Intro
Page 2: Basic Overall Pictures and Shaker mod
Page 3: Some Pictures of mods
Page 4: Sound System
Page 5: Sound System Install
Page 6: What the truck looked like Stock
Page 7: Pictures with or of other cars
Page 8: List of modifications
