Well, I just bought an 08 Mitsu Lancer manual GTS. It is elecrtric blue with Navigation and Rockford sound package. I will post more pix soon.
1995 Maxima GLE
"When I wear blue, I am like the wind. A hot LATIN wind!"
Exterior Modifications
- Custom Alarm Beep
- Custom Mesh Grill
- Fuba roof mount Antenna
- Blue LED 194 City Lites
- White LED 194 Corner Lites
- Cutom smoked/red Tail lights
- 16 Inch rims from 2001 Maxima
- Cefiro Black one-piece headlights
- 5% Limo Tint back and front windows
- Black/Clear Front Bumper Signal Lights
- EuroDezigns 8500K HID XENON KRYPTON HEADLIGHTS
- Trunk Mounted Rikaline GPS USB mouse receiver
- Front Bumper 1156 Xenon Hyper White Bulb
- Corner 1157 Xenon Hyper White Bulb
- Greddy SP2 Cat-back Exhaust System
- HiProSpeed Performance Y-Pipe
- Bomz Short Ram Intake System
- HiProSpeed Headers
Interior Modifications
- JVC KD-DV5100 DVD Deck
- Custom Blue Led Climate Controls
- Custom Blue Led Hazard/Defroster
- Custom Blue Led Window Switches
- Custom Blue Led Cruise Control
- Custom Blue Led Blinker Lites
- Custom Blue Led Security Lite
- Custom Blue Led Dome Lite
- Reverse Indiglo Gauges
- Blue Neons in front
- Red Gauge Needles
- Custom Blue Clock
- Bose Speakers
Carputer Modifications
Hardware
- T-View TM-700TS 7" VGA + Video + Touch Screen LCD Monitor
- ZyXEL 802.11g Wireless Wifi PCI Adapter
- U.S. Robotics 5dBi Swivel Antenna
- Rikaline GPS USB mouse receiver
- Logitech USB Mini Kerboard
- Hitachi 160gb Hard Drive
- Mini USB Optical Mouse
- 5 USB 2.0 PCI Card
- Computer Pentium
- 512 Ram
Software
- Centrafuse RC4.1 plays Mp3's and music videos
- Media Engine plays Mp3 and music videos
- Microsoft Streets And Trips 2006
- Windows XP Media Center
- Google Earth Map Pro
Mod Your Moto
Check out www.ModMyMoto.com
Update: 8.9.07
After two months I finally have my car running again. The problem that was causing the car to stall was the MAF sensor. I replaced it two weeks ago. The car worked great for the weekend until I installed a new knock sensor. Then it was back to square one. The car started stalling again, it was to the point to where I couldn't take it out of my apartment complex. I was so fed up. It got to the point where I just wanted to get a new car. I already invested about $1,800 in trying to get the car fixed. But on Tuesday, I decided to take out the MAF sensor and return it to Checkers Auto to use my warranty exchange. I did just that, and now I have my car back!!! I guess that the first MAF sensor I bought was defective. I test drove the heck out of my maxima after I installed the new MAF sensor and I did not run into any problems (knock on wood). Man, my max feels quick, and it sounds great too! So now I am finally going to post some updated pix of my install. Thanx for checking out my ride.
Pix of the Greddy SP2 Exhaust, Y-pipe and Headers
Pix of the old exhaust
Pix with the Greddy SP2 Exhaust installed
Pix of the Bomz Short Ram Intake
A pic of my car dead, on the side of the street
Installed/replaced;
Greddy SP2 Exhaust System
Y-pipe/hearders
Cat Converter
Battery
Fuel Filter
Bomz Short Ram Intake
MAF Sensor
Knock Sensor
Positive terminal plug (was corroded from previous battery)
Added Fuel System Cleaner
Cleaned Throttle
Update: 6.10.07
Well, my car semi stopped running. It likes to stall while driving. I had it towed to a mechanic last Tuesday and they performed a full diagnostic on my max. They said that all three of my cat converters are plugged and the whole exhaust system need to be replaced. It was going to cost $1,700 for factory parts, $1,900 total with labor. I was bummed when I found out. I didn't have that kind of money. But after thinkin for a little bit, just a little bit, I got a great idea. Why not spend a 1/3 of what I was quoted and buy after market performance parts and then install it myself. The price of labor would be a 12 pack of cold beers for my friend and I. And thats what I did, I ordered the aftermarket parts. I've always wanted to but didn't have the money. But now I need to and I'm saving alot of money. So I kind of see this as a blessing. After doing a little research on maxima.org, I ended up buying a GREDDY SP2 full catback exhaust system, JDM style headers and Mandrel bent Y-pipe, and a BOMZ short ram air intake system. The intake is nothing special, but it should do for now. As of now, I am waiting for the parts. But I will post new pics as I receive them and I'll also try to post pics of the install and the before and after. Wish me luck.
Update 1.25.07
I went to my first Maxima meet in Phoenix last Sunday. The meet was set up from Maxima.org. It was good times. There were more people that were interested in showing up, but couldn't because they either had to work or they went snowboarding up north that day (who can blame them, I'd go if I had the money). I am sure that there will be more faces and max's at the next meet. If your in the Phoenix area and are interested in attending a future meet, be sure to check out this site for more info
http://forums.maxima.org/showthread.php?t=506176
From left to right in the first pic is "2LEET4U" AKA "Rick with a six gen rollin on 20's; "BlkMaxNCa" AKA "Josh" with a fourth gen; "kidd4l" AKA Ronald with a six gen; and of course me "Lunaillij" with a fourth gen.
The only drawback was the I got my car washed that morning and as soon as it was cleaned, it starts raining. But that didn't stop the meet. By the time we were at the little meet, the sun was out and the rain stopped.
My clean car in the rain getting ready to go. Thanx "BlkMaxNCa" for taking this pic.
8.24.06
I finally was able to clean my car yesterday. But I woke up this morning to a great big thunderstorm!!! You gotta love that!
Update 8.21.06
I worked on the max again last nite. I got the passenger side headlight to fit nyce and flush with the fender. That didn't take long. The problem came in when I tried to aim the driverside headlight. It's damn near impossible to do. the passenger side is aimed good. But for some reason the driver side aim really high, its aimming up in the trees. Well I gave up after i finished my six pack of XX. I'll try again later. Any advice to get it to aim properly would be great. thanx again for checking out my ride.
Update 8.20.06
Before and after
My friend Tony and I worked on my car for about 6 hours last Friday. We had to cut out quite a bit to make the headlights fit. Man was it HOT outside in the Arizona heat. But we got about 98.75% of the work done. I still need to cut a bit out on the passinger side to have the headlight look more flush with the fender, the corner pops out just a bit. But I'm gonna wait abit to fix that problem. Its too hot to do it right now. The driver side looks great though. A side from the car needing to be washed, I think my Max looks great. But I let you folks be the judge of that. Please sign my guest book and let me know what you think. Thanx for checking out my ride. I will post better pics once I clean my max.
Here's a few more pics I took on my Moto SLVR
With the city lights on
Update 8.18.06 12.43am
I got the headlights� earlier today. I tried to install them when I was finished with work. Well it ended up being a lot harder than it looked. I had to cut some brackets that part of the frame behind the lights. I got most of the passenger side taken care of. But when I tried to install the headlight, it wouldn't go all the way back because part of the frame was in the way. So I gave up for now. I�ll try again tomorrow. Wish me luck on getting them on without breaking anything accidentally.
Here are a few pics I took with my Moto SLVR.
Driver-side headlight
A bracket I need to take off
This is a part of the frame i need to dremmel to get the corner part to fit
The passanger-side headlight most of the way in
update 8.1.06
I recently turned 25 and I am getting a new pair of headlights. I'm expecting them sometime soon. these are the lights I'm getting,
Black one-piece cefiro.
Will post pics very soon when I receive headlights
