here is the truck with the 33" tires and since I cant leave anything alone I just bought a set of 38" super swamper tsl's. MMM Needs more lift!!! yes more!!
I also bought a set of dana 44 axles from a wagoneer they are in but will be removed to add 4" more lift and some 519 gears.
The dana 30 is a piece of shit my truck had 456 gears 33" tire and the yokes just tear off! I will also be installing a 233c tcase so I can finally have low range. The 456 gears are insane with factory tires you can tromp the pedal and they will burn all day long.
http://video.cardomain.com/S10AUZZIE
heres a video of us wheeling and just having fun!
Just installed a straight dana 30 axle in the front of the old bravi. this setup added about 10 inches of lift to the truck soon it will get some new wheels and a set of 33" tires!
I also fixed up the carputer a bit by fiberglassing a 12 inch lcd into the dash and adding a amp to run the speakers. After using the carputer for a while I realized how much the small screen sucked to use while driving, so This is what I did---
<
Here are some of my parts---
Edelbrock 2114 intake for True 96+ Vortec heads
Edelbrock Pro-flow 27LB/HR Injectors
Crane Cams Powermax Camshaft For Balance Shaft Motors W/Rollers
Custom Machined Fuel Rails Tapped With inverted Flares
Injector Bungs 6
Injector Pigtails to splice into existing harness
Billet Fuel pressure Regulator
Just added shorty headers and dual 2.5 inch straight exhaust
Some Other mods....
Disconnected Balance Shaft
Ported Intake
Ported Heads
Custom throttle body/ Welded to Q-jet adapter
The new carputer installed. more pics soon!
Here is a pic with the 31" tires and only slighht trimming to Wheel Wells!
I had to test them
The tread is deep on these tires!
Heres the old 100 amp CS130d
This is the new 160 amp CS144 For a Loaded Caddy.
Page 1 Intro
Page 2 Stereo
Page 3 Headlights
page 4 Security system
Page 5 Transmission mods
Page 6 The Jimmy Jammer!!!
Page 7 Mud Mania Pictures!!!
