New pics updated on car slow progress.
Newly added addition for those like myself who have a hole cut through the hood and their scoop actively working. A Outerwear prefilter has been added. I ordered company direct for both my motorcycle and my car.
These prefilters allow you to drive in the rain with out getting water in your carb and there is no loss of performance off your filter.
Decided to put an air dam on the front pictures are as follows:
Using Welding Cable I relocated my Battery to the rear of the Car. Here is one pic you can see I ran cable through inside of car. Relocating also allowed me to go to a lot bigger battery I now have 1000 cracking amp. Bigger battery better cranking.
Pics of my Garage right now.
My dad made the Work Bench for me and the mini air compressor next to it.
IF anybody has body parts From 1979 Ford Mustang Pace Car or 82 GT such as Front bumper assembly complete with front
Air Dam / Valance in the Wisconsin or Tri State Area email me at JeremyKieler@gmail.com
Please no spam, chain letter, or any other bogus crap.
Hmmm I have a new idea!!!!
The next Project is a reference for all triumph owners who want to modify their stock exhaust to give it a little volume
THIS IS THE STARTING POINT FOR THE TRIUMPH THRUXTON 900
HERE I MADE A GUIDE FOR THE HOLE SAW, SO I COULD KEEP THE SAW CENTERED.
YOU PLACE THE ADAPTER IN THE MUFFLER AS SHOWN
NOW YOUR WHOLE SAW WILL HAVE A DRILL BIT IN THE CENTER YOU WILL SLIDE THE DRILL BIT THROUGH THE CENTER OF THE ADAPTER. THIS WILL KEEP YOU CENTERED.
DURING THE PROCESS OF SAWING YOU MAY WANT TO HAVE SOMEONE HOLD THE MOTORCYCLE OR STRAP IT DOWN SO YOU DON'T PUSH IT OVER.
YOU WILL PULL OUT THE FIRST SECTION CUT THROUGH HERE AND SEE THE FOLLOWING
REMOVE THE ADAPTER FROM THE CUT OUT PIECE AND PLACE IT IN THE INNER SECTION SHOWN ABOVE TO CUT OUT NEXT SECTION.
HOPE THESE IMAGES HELP FELLOW RIDERS
