2005 Infiniti G35 Coupe, 6 speed manual transmission, 298 hp stock
We'll start off with whats most important to me with my car, and that is road course racing, with NASA in the Time Trials B category. Here's a picture of me going through the "Attitudes" (a right/left/right downhill corkscrew at Miller MotorSports Park) with a good friend of mine (who is actually faster than me) in a 350Z following me:
Now, some pictures of the exterior:
And here is the rear view, which is what many other cars see, along with the Twin Turbo emblem
And a closeup of the rims, Racing Hart RS-721, 19"x9.0" fronts with 245/35/19 Falken FK-452's and 19"x10.5" rears with 275/35/19 Falken FK-452's, Kics Project R40 Neo-Chro lugs and ARP extended wheel studs:
Engine
Crawford high flow cats, HKS Ti True Dual exhaust, JWT Popcharger, MotorDyne MREV modified upper and lower plenums, Deatschwerks 440cc injectors, Walbro 255 lph fuel pump, ATI Fluidampr pulley, GordGee Grounding Gear, Stillen Oil Cooler w/Mocal thermostat, APS extra capacity finned Oil Pan, HKS Twin Power DLI II, Okada Projects Plasma Direct coils, dual Greddy Oil Catch Cans, AMS radiator, NISMO Thermostat, SPAL electric fans w/temp control, stainless steel clutch line and the JWT Twin Turbo kit , all flowing through a JWT Heavy Duty Clutch and lightweight flywheel and managed by the Haltech ECU w/boost solenoid for 8 PSI. All piping is thermally wrapped to help prevent heatsoak. Below is the engine bay, not the cleanest, but definitely powerful!
And the mandatory dyno scan, with 363 rwhp at 6000 rpm and 346 ft/lbs at 4500, with over 300 ft/lbs from 3000 rpm all the way to 6500 rpm
Suspension
Stillen Adjustable Sway bars with urethane bearings, SPL Endlinks, Stillen Strut Tower Bar(front), GT Spec Rear Tie Brace and Lateral Tie Brace, Weapon-R engine damper, Stillen Power Steering Cooler and Weapon-R Power Steering Fluid Reservoir, Tein Hood Shocks
Brakes
StopTech ST-60 6 Piston 355mm Slotted Fronts, ST-22 2 Piston 328mm Slotted Rears, Braided Steel lines all around, and Motul RBF600 Brake Fluid. PFC-01 Race Pads (track only)
Interior
NISMO Short Shifter, Valentine 1 radar detector, Forged Performance aluminum bullet shift knob, Redline Goods custom shifter boot, Blitz R-VIT MultiMeter
Autometer Nexus Gauges (boost, oil temp, oil pressure in A-Pillar, Wideband Air/Fuel and Fuel Pressure in DIN slot below stereo)
Here is a pic of all the gauges, the Blitz R-VIT, and the V-1 detector.
Audio
Alpine DVA-9965 HD Radio/DVD Receiver, lots of dynamat over everything
Front Speakers: Boston Acoustic Z6 components, bi-amped with a JL Audio 450/4
Rear Speakers: Alpine SPS-17C2 6.5" coaxials amped with a JL Audio e2150
Subwoofer: JL Audio 10w6v2 in custom box amped by a JL Audio 500/1
Other: 0/1 gauge wire from battery to block, Streetwires fused power/ground distro block, 4 gauge wire from block to amps, dynamat all around, 1.2 Farad Tsunami capacitor, Optima D35 Yellow Top battery, & Excessive Amperage 200 Amp alternator
Here is what the audio setup looks like without the cover:
Here is what the audio setup looks like with the cover and the viewing window:
And the sub box with a JL Audio 10W6v2:
And here is the head unit, also showing the CarPC screen. This pic also includes my fuel pressure gauge and wideband A/F gauge.
Ok, and here is my CarPC setup
First, the PC itself, with a custom case of plexiglass
Specs:
Kontron 986LCD mini-ITX motherboard
Core Duo 2.16x2 GHZ
2 sticks of 512 mb for a total of 1 gB
ATI Radeon x1300 PCI-X video card w 256 mB
Intel mini-PCIx 802.11 a/b/g wireless card
Super Talent Solid State Disk (SSD) 120 gB 2.5" HD
Generic slot-load DVD-ROM
DSX12ATX (also known as DSX Power Sequencer, a DC-DC power supply)
Rear View Camera mounted by license plate
PinnacleSys HDTV card
XM Radio Controller
Bluetooth Phone interface
Seperately, in the glove box, the following:
D-Link 7 Port USB Hub
DVD Drive
Next, the touchscreen(a transflective Xenarc 700TSV), with a custom front end (a program called StreetDeck, made for touchscreen use) Underneath it all, it is still running Windows XP SP2. This pic also includes my fuel pressure gauge and wideband A/F gauge.
For antennas, I have
2x 3dbI Mobile Mini Antenna, centered on 2.4 ghZ (for 802.11 b/g)
BU-353 USB GPS Antenna
For input, I have the touchscreen, of course, and the following:
Logitech DiNovo mini Bluetooth keyboard
MS Wireless USB Laser mini-mouse
For Computer Audio, I have:
Hippo HiFi Bloat USB DAC, inputs in Alpine DVA-9965 head unit
And here's how the sound flows:
Future Plans include the following
Tanabe Sustec-7 with TEAS Electronic Adjustable Coilovers
.
.
.
.
.
Link to my mp3car.com page
which is my install thread for my CarPC
Well, had to get new rims, since I curbed my old ones (the Racing Harts) New ones are PIAA Super Rozza's, 19x9 in front, 19x10 in rear, +25 offset all around, 245/35/19 front tires, 275/30/19 rear tires. Here's a couple of pics of the new shoes:
Posted by: Robert_K
05/03/2009, 08:05pm
How's it going Dave!? Need to get your e-mail so we can in touch better. How's the G running? I just order a set of RPF1 for road racing this summer. Looking at doing a built long block too. Holla back when you have a free min. ~Robert