Me and my ride:

My Ride:

This is my 96'z28 Daily Driver. I really have fun in this car!!! 1 of 17,000 z28's made this year!!! I am the third owner of the car.

*Full Engine Rebuild. LT1 motor (350 cui) w/ .030 overbore (now 355 cui) and splayed 4 bolt main caps.
-fully balanced and blueprinted
*Eagle 4340 forged stroker crank and 4340 h-beam rods
*SRP forged pistons with perfect circle rings (11.8:1 compression ratio)
*Clevite bearings throughout
*LE2 Ported Aluminum LT1 heads
-COMP Bee-Hive Springs, COMP 1.6 roller rockers
-Morel Lifters, Manley oversized valves w/ valve job (2.02/1.6)
-Comp Chromoly custom length pushrods
*Ford Racing LIGHTENING 42# matched injectors
*FAST engine management with wideband for tuning
*58mm Polished AS&M throttle body
-ported and matched intake manifold
*1le intake elbow
*Granatelli MAF
*K&N FIPK CAI kit (modded front lower spoiler for cold air directed into the filter from under the car)
*125hp shot of Dry ZEX Nitrous (w/ gauge on bottle, velvet bag, bottle warmer, dumpouts, purge kit w/ red strobe lights, fuel management system, electric remote bottle opener).
*Walbro High flow fuel pump (255lph) for nitrous.
*Custom Grind LE2.3 billet COMP cam (235+duration, .560+ lift at less than 110 LSA)
*Mallory LED 685 ignition retard box/window switch
*Metziere electric waterpump conversion
*200 amp alternator
*APC Billet black anodized underdrive pulleys
*High Flow oil pump m55
*Hooker Jet Hot LT Headers
*Y pipe to flowmaster muffler with electric cut-out
*Centerforce dual friction clutch w/ light aluminum flywheel
*B&M short throw shifter (6 spd Tremmec) w/ lock nuts
*BMR adj. torque arm
*Performance lower control arms
*Aluminum polished adj. panhard rod
*SLP subframe connectors w/ black powdercoating
*LCA Relocation brackets red powder coated
*Drilled and slotted Brembo rotors front and back
- axxis semi metallic pads for d&s rotors
- red painted calipers
*Bilstein revalved SLP shocks front and rear
*4.10 gears w/ a T/A girdle and bearing savers
*Ground Control Coil Overs
*Red Powdercoated front shock tower engine brace.

*Painted body color custom fiberglass SUPERHAWK Ram Air hood
---Stainless Steel Z28 emblems on front of ram air on hood (not in pics)
*Painted Bodycolor SLP rear valance for center tips (not in pics)
*Red painted calipers front and back w/ custom CAMARO vinyl lettering (not in pics)
*Genuine GM ZR-1 Chevy 5 star wheels ( custom chrome plated at a shop ) 17x8 in front and 17x10 in rear
-New Goodyear Eagle F1 fronts and 315/35 rears (12" wide)!!!
*Stainless Edelbrock Quad Tips
*Stainless z28 and bowtie Badges in Rear
*Chrome SLP badge in rear
*SLP license plate cover
*Stainless LT1 Badge on Throttle Body under hood
*Stainless Billet style front grille (not in pics)
*Clear rear and Clear Front lights ( fronts not in pics)
*Stainless z28 w/ flames badge on hood front (not in pics)
*Stainless "GM PERFORMANCE" badge on inside console
*2 gauge a-arm pillar pod
*Skip Shift Eliminate Mod
*SLP badge on inside
*Dashmat on Inside
*New tan leather interior
*35% tint on fronts, 5% tint in rear and on t-tops
*Alpine CD deck with 2 12" JL subs and custom box where the t-tops store
*New Front Window
-Tint Stip on front window ( 5% )
*h7 headlight conversion
*Chromed/ghost flamed fire extinguisher
*Custom Stitched "z28" GM Lloyd mats

This is my OTHER hobby....Go-Peds :)