Page 1: CCFL Angel Eyes "how-to" tutorial
Page 2: List of mods and their photos (You are here if you believe you are here)
Page 8: Ideas for future mods

Sign the guestbook so I know you were here.
My Car's Pics & Info are currently on Page 2!

All modifications done to this car (body, interior, performance, suspension, electrical, audio) were done by me, alone, with my own two hands ONLY! This car has never, nor will it ever go to a shop for a mod because the rule I have for my car is if someone else does the work, then I cannot take pride in it and say it's MY car.

I am almost 30 and this is the first (and probably the last since I am almost 30) car that I have modified. So, I am doing everything I can now before I get too old. To me there is no "Rice" or "not rice", I am too old for that crap. If i want it, I do it. I think a "customized" car is one that is an expression of the person driving it. Like a unique piece of art.

 

UPDATE December 13th 2008:

Exterior:

Interior:

UPDATE July 21st 2008:

 

UPDATE July 8th 2007:

Vertical/Lambo doors! The "kit" (hinges) are a direct bolt-on set for a 95-99 Mitsubishi Eclipse. They line damn near perfectly on the "Classic" model Malibu for an almost bolt-on fit. Pics were taken today (Juuly 8th):

 

Love those White CCFL Angel Eyes, don't ya. Look how bright and visible they are.....and that is in the sunlight! Imagine how they look at night. None of those over-priced, dim, aftermarket, JDM (or whatever they are called) LED "Halo headlights". Do-it-yourself job with 5x the brightness and about 1/10th of the cost. Eat your hearts out ricers/haters!

 

Angel Eyes & projectors on.....

UPDATE April 18th 2007:

Retrofitted Hella A6 Single Xenon Low-Beam Projectors with my Xenon HID System (which I have had for a while now but was using with the stock headlights without the projectors) and GE 6000K D2S Xenon bulbs with blacked-out headlight housing and, of course, my same old white CCFL 80mm dual Angel Eyes Halos. Yes, again, I did all this myself over the past week.

Nothing on CCFL Angel Eyes
A6 projectors
Lights up the road

Older Pics (ie. before the last update):

From all angles (these pics are too small to see anything,so you should click on them to see better):

From a distance:

Modified fog light opening to accomodate the 3-in-1 lamps:

white CCFL triple Angel Eyes from a distance and up close:

the 3-in-1 lamps (white driving lights):

the 3-in-1 lamps (secondary turn signals caught in mid-flash with the 4-ways on):

the 3-in-1 lamps (yellow fog lights):

Butt shots with the blood red CCFL Angel Eyes reverse lights:

List of mods:

Exterior:

- full homemade body kit:
I. Front bumper mods:
i) front brake cooling ducts

ii) front fascia air intake ducts below lower grill
iii) louvered side air escape vents

 

II. Side skirts/Rocker panel mods:
i) air intake ducts up front
ii) wind splitting lip moulded in middle
iii) air escape ducts at rear

III. Rear bumper mods:
i) louvered air intake ducts moulded into sides

ii) side fascia gutted to provide air escape paths

iii) rear fascia air diffuser under licence plate

 

- M3-style chrome-trimmed sideskirt and rear bumper air duct louver spears
- bra customized to work with front bumper and secured along seams with chrome-capped screws

- QMI brand chrome fender flares (2 of the 3/4 arch sets which were then modified to produce 1 full arch set)

- Double bar Escalade style fender vents (I shaved out my former louvered style fender vents and then smoothed the fenders out back to a stock look and the added the new vents over top)

- Rear window visor/spoiler (I custom made this out of two of the standard sunroof visors by joining them together and then heating and molding the peice to the right shape for the Malibu)

 

- gloss black vinyl wrapped hood and trunk lid

- carbon fiber hood scoop

- E graf-X 5145 130" gloss black tribal side graphic
- E graf-X 5145 gloss black tribal hood graphic used as side graphic extension (pics coming soon)
- E graf-X.com rear side window decals
- lower grill gutted and replaced with modified Denali billet grill
- chrome upper grill
- chrome-finish billet aluminum door handle overlays (not chrome vinyl, actual metal)
- retrofitted GM XL Yukon chrome-finish billet aluminum replacement fuel door
- gloss black vinyl wrapped m3 spoiler with led strip


- blacked-out hood deflector and matching window vent visors
- chromed front and rear emblems

- black &/or chrome accent mouldings added around car body
- 3' "Malibu" decals added to hood deflector & trunk lid
- black gravelguard on wheelwells and rocker panels
- black Chevy pinstriping
- LED and CCFL halo retrofitted IPCW Bermuda Black altezza taillights

- chevy tribal front windshield decal

- smoke upper winshield sun shield tint strip

- white flaming "hyperactive" skull rear windshield decal

- 3' white MetallicA logo rear windshield decal

- smoke licence plate covers w/ barbedwire trim up front

- homemade sideskirt lips
- LED retrofitted euro clear sidemarkers
- 360 degree tint
- custom euro antenna

- 4 custom fit splash guards
- sidemirror-mounted blind spot mirrors
- 2 large & 2 medium Black polyurethane canards (pics coming soon)
- 3 18" white "Vertical Doors Inc." logo decals (1 on each front door window and 1 on rear window)     (pics coming soon)
- 2 8" white "Verde Custom Wheels" logo decals (1 on each rear door window) (pics coming soon)
- Vertical Doors Inc.95-99 Mitsubishi Eclipse vertical door hinges (slightly modified to fit the Malibu) w/ 600lbs. struts (pics coming soon)
- front door weatherstripping/sealant additions (pics coming soon)
- chrome hood deflector trim (pics coming soon)
- chrome door and fender edge protector moldings (pics coming soon)
- gloss black vinyl flame roof decal (pics coming soon)
- 99+ Pontiac Grand Am GT dual arm side mirror retrofit (pics coming soon)
- gloss black vinyl wrapped side mirror mounting plates (pics coming soon)
- gloss black vinyl wrapped vent visors (pics coming soon)
- Ionic Dynamics (www.ionicdynamics.com) 1995 Nissan Maxima 2pc. rear valance
- 1995 Honda Accord custom fitted ABS Type-R front lip
- chrome B-pillars and rear door pillars overlays

 

Exterior Lighting:

- Retrofitted Hella A6 Single Xenon Low-beam projectors
- 50W 5000K HID lowbeams
- 35W 6000K HID Hibeams

Retrofitted dual projector driving lights:
- retrofitted 2004 Nissan Maxima projector fog lights
- 35W 6000K HID Maxima foglights
- retrofitted 2004 Nissan Maxima projector fog lights (yes I have 2 sets on the car)
- 35W 6000K HID Bosch foglights

- GE 5000K D2S 50W Xenon bulb conversion

- Audi-style white LED strip headlight upper eyebrows
- Eurolite super white cluster LED front turn signal bulbs
- ALC disabled on front turn signals only
- custom ALC crossover DRL disable
- 194 sidemarker bulb conversion
- red 194 sidemarker bulbs
- homemade/custom white CCFL angel eyes (80mm rings around lowbeams and highbeams)

- LED tail light retrofit (10 LEDs in the tops, 8 LED's in the sides) with red CCFL Angel Eyes in turn signal and reverse light sections

- red cluster LED brake light bulbs (2 in each tail light)
- super white single LED lighted front license plate bolts

- white LED rear mounted sidemirror turn signals
- red LED front mounted side mirror ">" turn signals

- 8 (4 on each side) red cluster LED undercar turn signal bulbs (Eurolite firelites)
- 15" red LED tube undercar brake light
- 12 red 24" flexible LED strip wheel well lights (3 strips under each wheel well) (pics coming soon)
- 3 Red flexible LED tube underbody light kit [4x 48", 4x 36", 4x 24"] total underbody glow (pics coming soon)

- 4 red 20-bulb high-intensity LED chip-style door handle lights (1 under each door handle)
- this is the driver's side led door handle.
- neon red rear licence plate frame

- super white LED front dooredge markers
- the driver's side door edge marker under the door handle.
- 2 36" red LED tubes behind front lower grill (1 right above it 1 right below it)
- 24" red LED tube behind front upper grill
- 2 6" red LED strips built-in behind front bumber side air-escape ducts
- 2 15" red LED tubes built-in behind rocker/side skirt air-escape vents

- 2 6" red LED strips built-in behind louvered rear bumper side air intake ducts
- showing the leds behind the vents (pic looking up from under the rear of the car.
- 2 15" red LED tubes built-in behind rear fascia side air-escape ducts
- you can see this one in this pic too.
- M3 spoiler red LED strip

- 1 6" red LED strip behind hood scoop opening (pics coming soon)
- 4 24" red flexible LED light tubes under ventvisors illuminating all 4 door windows (1 tube under each ventvisor) (pics coming soon)
- red neon ring chrome exhaust tip (pics soming soon)
- 10 red 20-bulb high-intensity LED chip-style fender vent lights (1 under each vent louver)

 

Interior:

- full custom black and yellow dye/paint interior
- yellow/black leather seat covers
- carbon fiber/black steering wheel cover
- chrome "Malibu" door sills for front doors

- accent trim pieces wrapped in gloss black vinyl
- shortened shifter pillar
- billet mirror chrome shift knob
- black leather shift boot
- 2-1/16" triple gauge cluster (AutoMeter Cobalt digital Amp Current (ammeter) and AutoMeter ProComp volts and Oil Pressure) with blue LED backlighting
- HVAC knobs cleared and tinted marble blue

- white face glow gauges
- chrome instrument cluster gauge bezel
- Pyle 7" LCD widescreen black sunvisor monitors with built-in TV tuner (driver & passenger sides)

- underdash DVD player with MP3, DVD+-R/RW playback
- "On-dash" Pyle 7" LCD monitor in yellow colour matched shroud mounted on 3-axis 360 degree swivel mount stand (pics coming soon)
- 19pc. carbon fiber dash trim kit

- custom switch panels

 

Interior Lighting:

- 3pc. blue LED billet pedals
- blue single LEDs in coin compartment (1 on driver's side, 1 on passenger's side)
- blue LEDs in center air vents (4 on driver's side, 4 on passenger's side)
- blue LEDs in side air vents (4 on driver's side, 4 on passenger's side)
- 2 15" blue LED tubes under dash (1 on driver's side, 1 on passenger's side)
- 2 6" blue LED strips under front of front seats (1 on driver's side, 1 on passenger's side)
- 2 blue 6-LED cluster pods inside front of front door pockets (1 on driver's side, 1 on passenger's side)
- 2 6" blue LED strips under rear of front seats (1 on driver's side, 1 on passenger's side)
- 2 single blue LEDs in rear cupholders (1 on driver's side, 1 on passenger's side)
- 4 single LEDs in each speaker (12 speakers)
- 2 blue mini strobe tubes in dome light
- white CCFL mini ring bulb in dome light

- 8 super white single LEDs in ceiling above the doors with built-in optional strobe setting (4 on each side)
- 3 9" blue neon tubes under visors with built-in optional strobe setting (1 on each side and 1 on rear ceiling)
- 8 blue single LEDs built-in to center trims (4 in radio trim and 4 in shifter trim)
- 3 blue single LEDs built in to arm rest compartment
- 2 blue single LEDs built in to CD compartment
- 4 24" blue LED strips along door steps as courtesy lights (1 along the inside of each door)
- 2 red CCFL ring cupholders with transparent acrylic faux bottoms (front) (pics coming soon)
- 2 blue LED cupholders with transparent acrylic faux bottoms (back) (pics coming soon)
- 10xRed/White/Blue CCFL speaker grille backlighting (pics coming soon)

 

- a pic of the blue glow from the drivers side rear door 24" Blue LED cortesy light strip. They come on when you open the door.

- another pic of the Blue LED courtesy light strip on the inside driver's front door.
- blue accessory gauge bulbs
- blue glove compartment bulb
- blue trunk interior bulb

Audio:

- DUAL AM/FM/CD/MP3/etc... head unit with motorized flip-down controls with display in behind and remote (black with blue lights model)
- 2 12" DUAL 750Watt Subwoofers in trunk w/ built blue LED "Illuminite"
- DUAL 500Watt subwoofer bass amp
- 2 Jensen 260Watt 6x9 triple swivel-mounted tweeter low-level speakers in back
- 2 DUAL 160Watt 6.5" swivel-mounted tweeter low-mid level speakers in rear doors w/ built in white LED "Illuminite"
- Jensen 340Watt power amp for 6x9s & 6.5s
- 2 Pioneer 150Watt 5.5" swivel-mounted tweeter mid-level speakers up front
- 2 Pioneer 120Watt 4" swivel-mounted tweeter mid-high-level speakers built in to upper part of front doors

- 2 Pioneer 100Watt dome tweeters under windshield

- Jensen 340Watt power amp for 5.5s, 4s, and tweeters
- built in music sensors for all interior lighting

 

- the 2 doohickeys beside the rear-view mirror

- Trunk lid, doors, and floor all deadened with B-Quiet extreme deadener

Performance:

- 3 pc. ChromeIntakes CAI with K&N filter and heat shield
- Pilot Motorsports chrome 3" exhaust tip with red neon light ring tip

 

Suspension & Wheels:

- Canuck Motorsports 1.5" drop lowering springs
- Monroe struts

- RSM/Z-Spec solid billet front strut tower bar

- RSM/Z-Spec solid billet rear strut tower bar

- Speedbuilt rear 7/8" swaybar with polyurethane bushings (listed for 99+ Grand Am)

- Speedbuilt front 1&1/8" swaybarwith polyurethane bushings (listed for 99+ Grand Am)

- Moog front and rear swaybar end links and bushings
- 17" Verde Scorpion chrome wheels
- Goodyear Eagle F1 All Season 235/45/ZR17 tires

 

Electrical:

- 160A high-output alternator
- "Big 4" upgrade in 2AWG wire with 200A ANL alternator-to-battery fuse
- 2AWG engine/chassis/battery grounds added
- Optima yellow-top battery for Monte Carlo made to fit with modified battery tray
- 4AWG main accessory power wire from battery with 100A ANL fuse in Dragster fuse holder with digital voltage display
- 4AWG power wire into fuse holder with 2 8AWG outputs fused at 60A each
- 1 8AWG output split into 2 8AWG wire going to 30A cicuit breaker and 40A circuit breaker and other 8AWG output wire into 60A circuit breaker
- 5AWG out from 60A circuit breaker to splitter with 3x8AWG out to amps power
- 10AWG out from 30A circuit breaker to Rockford Fosgate AGU fuse block with 4x14AWG outputs fused at 10A each
- 4 14AWG wires out and split to power all aftermarket accessories
- all aftermarket accessories grounded with 14AWG wires spliced into 10AWG wires in certain areas
- 10AWG ground wires spliced into 1 of 3 8AWG ground wires (along driver's side, passenger's side, and under hood)
- 3 8AWG ground wires into distribution block behind rear seats with 1 4AWG ground wire output
- 3 8AWG amp ground wires (1/amplifier) out to distribution block (splitter) with 1 4AWG ground wire output
- Both 4AWG ground wires out from distribution blocks into splitter with 1x2AWG output
- single 2AWG wire out of splitter to ground

 

Past mods no longer on the car:

- chrome steel flame trim added around rear "wave" emblem

- chrome & black trim around wheel wells

- LED-retrofitted Malibu trunk emblem (someone ripped it off and stole it) :(

- Gloss black vinyl ountline decals for fender and rear bumper vents (pics coming soon)

- louvered front fender vents (not z3) moulded in

- chrome trim for fender vent louvers (pics coming soon)

- 1995 Honda Accord custom fitted ABS Mugen front lip

- billet rear strut tower brace (Cavilier front bar with rear brackets)

- 2 8AWG wires into 2 60A max ammeter gauges to measure circuit amperage (1 8AWG in each gauge, 1 8AWG out of each gauge)

- 2 8AWG wires out of gauges and into 2x8AWG input fuse holder with 8AWG out fused at 60A and 10AWG out fused at 30A

- polished chrome front strut tower bar
- gloss black vinyl wrapped door handles and gas door
- full homemade lower body lip kit
- "AutoMeter Competition Instruments" gas door decal (pics coming soon)
- 3-in-1 super white driving lights, ion yellow fog lights, and white secondary lower-front turn signals
- yellow/black steering wheel cover

- gloss black vinyl wrapped hood scoop moldeed in (pics coming soon)

- chrome hoodscoop trim/molding (pics coming soon)

- Ventus 215/50/17 tires

- retrofitted Bosch Mini projector foglights

- chrome dual angle cut exhaust tip

- homemade/custom CCFL angel eyes taillights (Updated to 4 CCFL rings in each taillight [pics coming soon])