***DON`T FORGET TO RATE MY CAR AND SIGN MY GUESTBOOK***
***LOOKING FOR SPONSORS***
STEREO (interior)
PAGE 1: Body mods
PAGE 2: Engine mods
PAGE 3: Stereo (interior w/motorization video)
PAGE 4: Stereo (trunk w/motorization video)
PAGE 5: Memory from the pass (PGcivic)
-The stereo is 100% Phoenix Gold except for the multimedia which is Alpine. Here�s a list of what the stereo consist of:
1. PG Special Edition Reactor amplifier x2,
2. PG TiEQ 30 x2,
3. PG TiBasscube,
4. PG Ti400.2 amplifier,
5. PG TiDD10 power distribution center,
6. PG TiPowercore (20 farad),
7. PG TLD66,
8. PG Ti15 DVC subs x2,
9. PG TiElite 5m competition set x4,
10. PG TiElite 9m midbass driver (pair),
11. PG SDT/RDDP kit x5 w/10 digital display,
12. Alpine IVA-D900 mobile multimedia station,
13. Alpine TME-M750a monitor x6,
14. Alpine TMX-R1000 10.2" monitor x3,
15. Alpine CHA-S614 cd changer,
16. Sony PS2.
1. The system diagram.
1/2. The Phoenix Gold and Alpine equipment going into the car. Lots of stuff let me telle ya!!!
3/4. The interior of the car was totally stripped so the stereo could be installed and I mean totally strip!!! The back seat was removed to make place for total custom interior rebuilt. As you'll notice a few layers of PG sound deadening material was laid out all over the interior of the car.
5/6. All of the pans for the stereo equipment were made entirely out of fiberglass. They will be painted to match the color of the car.
7/8. The trim construction for the subs and rear fill took a lot of work, fitting and patience!!! Done in 3 pieces it will house the 2 PG TI15 DVC subs and a set of PG Ti Elite 5m competition (rear fill).
9/10. For the boom 2 PG Ti15 DVC subs will installed in 2 separate seal enclosures. As you can see a lot of work went into building this sub box, which by the way also include a motorize amp rack (see pics 12/13)!!! Once complete the sub trim will be painted/match to the same color of the car.
11/12. A quick view of all the PG equipment installed. Eveything will be mounted on pieces of plexiglass and will be backlit with blue neon, giving a floating effect.
13/14. The PG TIDD10 is installed on an actuator. In the out position it reveal a PG Ti400.2 which runs the Ti Elite 9m midbass driver.
15/16. A molded fiberglass trim will cover everything. Once completed it'll be covered in black vinyl.
17. More sanding will be needed before it's ready for vinyl.
-Even though the stereo shop under estimated the labor cost, they still did an incredible work. The attention to details is just plain crazy!!!
PAGE 1: Body mods
PAGE 2: Engine mods
PAGE 3: Stereo (interior w/motorization video)
PAGE 4: Stereo (trunk w/motorization video)
PAGE 5: Memory from the pass (PGcivic)
STEREO (interior)
***DON`T FORGET TO RATE MY CAR AND SIGN MY GUESTBOOK***
***LOOKING FOR SPONSORS***
