Well ok On December 12th, 2006 I picked up some JDM POWER FOLDING MIRRORS.
Finally on January 4th, 2007 I decided to get off of my lazy ass to install them.
Here is the USDM and the JDM side by side. (NOT much difference)
Here is what the inside of the USDM mirror looks like. (just a spring)
Here is the JDM folding Motor installed in my mirror housing. (notice the motor)
Putting the mirror back on
Here is where I installed the Relay.
Wiring up the relay to the mirror and switch!
Doors were removed. Because you need to send 2 wires from the relay to the passenger side mirror for the fold and unfold signals.
Here you can see where I drilled a hole for the 2 wires to come out through. I didn't wanna drill any holes, but I couldn't run the wires through the connector on the door. *damn it*
Relay, Driver's Mirror, Passenger's Mirror and Switch all wired up and Secured.
Switch installed
Mirrors Installed and Folded
Here they are in ACTION!
PG.1 The Begining
PG.2 Exterior Pics
PG.3 WWRS KIT (GONE)
PG.4 JDM FOG LIGHTS
PG.5 NEW OEM LIP KIT AND OEM CF TRIM
PG.6 www.SFPOA.net Florida Preludes Forum
PG.7 Lip Kit install/ OEM CF Trim & Rota GT3's back on
PG.8 Lean Short Shifter
PG.9 Custom Stereo Install
PG.10 New Pics and Local Luders
PG.11 TSX Projector Retrofit Pics
PG.12 You are here
PG.13 Photo Shoot Dec 24, 2007
PG.14 DIY Chrome Bezel Rings/Gold Brake Calipers/ Samco Green Hoses
PG.15 Turbo Kits parts/install
PG.16 Pics Of the Lude turbo’d
PG.17 New Clutch, CV Axles, Master & Slave Cylinder
Bookmark this Ride