Hi my name is Jeff Thompson and this is my install of A Volvo C-70 coupe. It currently has a Pioneer P7000CD monitor, 6-disc changer and Navigation. Which is for sale. These Units are being replaced with an ALPINE IVA C800 monitor, CD changer and Navigation. I've also installed Apline PXA-H510 5:1 processor, an Alpine DVA-5200, Playstation, 3 Genesis amplifiers, and 3 JL10w6's. The reason I switched to Alpine equipment is because Pioneer did not make an in-dash DVD player, and for easier controll of the system.
�
This is the Interior, after damping material added, Here you see Pioneer's Master AV unit P7000R mounted under driver's seat and on passenger side the glove box removed in preparation for the Pioneer 650 6-disc changer. The ALPINE equipment will occupy the same places.
Glove box removed.
The face of the Pioneer 6-disc changer was removed and replaced with a custom panel, before put back into the glove box, where there is still room to hold an extra 6-disc magazine and 4 cd's w/case.
behind rear seat before stinger noise killer was added.
Stinger noise killer utilized to kill rattles form behind the rear seats.
After road kill applied Dynamat was used to insure no rattles
Rear deck removed and cut to allow sub bass to travel through car.
Metal grill used to cover hole in rear deck.
Rear deck once metal grill replaced rear deck speaker grills recovered with matching grrill colth for a better look.
Rear deck back in car.
Sub box in construction in my garage, pictured are some of the materials used to help seal and strengthen the enclosure.
Here you see the trunk with it's damping material, sub box enclosure placement test, "the CAP" on right hand side. and placement test of amps.
This is the test fit of the first floor board.
The trunk in the VOLVO was not level at all, these braces serve as floor levelers and a frame for my floor boards.
With this picture you see the frame for the floor and the playstation before the case color was changed to blue, amp rack in place, and the Alpine PXA-510 before mounting.