This page is a listing of my future mods. I plan to get just about everything except the nitrous...
First... This is a pic of the rims that I want... 20's in the back and 19's in the front with some wide nitto drag radials in back and not sure about the tires in the front.
-QTP Long tube headers (Received 4/19/06)
-QTP Y-pipe with QTECs (Received 4/19/06)
-Hypertech 160 degree stat (received)
-Meziere Electric water pump (received)
-LSX intake manifold
-90mm NW throttle body
-Textralia Exoskel clutch
-Textralia aluminum flywheel
-Rebuilt tranny from t56rebuilds.com
-AFR 205cc Heads
-Custom grinded turbo cam by Speed Inc.
-NX 150 wet shot to compliment my turbo (once the bottom end is forged)
-Double rolling timing chain
-New springs, retainers, rods
-Forged bottom end (forged crank, pistons, connecting rods)
-Speed inc stage 3 race feul system
-4th gen Koni SA shocks with strano springs
-Baer Brake system... Brembo is wayyy too much money...
-Moser 9inch rear end w/4.11 gears
-BMR upper panhard relocation kit (received)
-BMR adjustable panhard bar with rod ends (received)
-UMI Lower control arm relocation brackets
-BMR STB
-BMR subframe connectors (Received 4/10/06)
-Strano rear/front sway bars
-UMI heavy duty drive shaft
-UMI drive shaft saftey loop
-UMI Torque Arm
-A tripple pillar for some carbon fiber guages and maybe some more in the vents if needed.
-MSD Coil packs
-NGK 55TR platinum spark plugs
-And unless im forgetting some stuff which i probably am... last but not least is a GT-88mm Turbo setup with an intercooler, gonna be installed by speed inc. when I manage to get the money...
As far as exterior, interior and sound goes...
-American Torque Thrust II's black powdercoated spokes and polished lip and center cap. 17x11 rear and 17x9.5 up front with Nitto 555R DR's or BFG DR's
-WS9 Outlaw hood (before Christmas)
-T/A hatch (received)
-Complete Trans Am body conversion except the front bumper (completed)
-Sparco racing seats
-Possibly headrest DVDs too
-T-top box with 2 12s and 2 amps.
-After all that is done then a new paint job to get rid of scratches and dings here and there and black stripes.
All of this is off the top of my head. If i remember or find new stuff to add then I will. I want this car to be a combination of race and show but also be able to drive in the streets. I will post pics and maybe dynos along the way...
