Update... May 6th 2006, I was rear ended by a drunk driver which totaled my car out... I have since, bought another GTP, which most of my cars parts were kept since it was just the rear that was destroyed... Heres my new GTP... http://www.cardomain.com/ride/2359912

Heres a few pics of the car after the wreck...

This page will be left up... Un-updated...

Page 8, Updated 04/10/2006, installed Sirius radio and got a couple cleaned up engine pictures...
Page 8, Updated 03/30/2006, Got an MSP intake installed, new headlights, and a couple other things...
Page 5, Updated 02/24/2006, few more pics up on my wish list.
Page 8, Updated 02/15/2006, got a couple things done to my car, (maybe 4 pictures or so.)
Page 5, Updated wish list with pictures 02/13/2006, removed a few of my old items I decided I didn't want.
Page 9, updated 02/05/2006 with about 25 or so new showy like pictures.
Page 7, just updated with a new video. Go check it out.
Page 9, created 01/29/06, I took alot of pics at a place here in Kansas City, came out nice with my new camera. Check it out.
Page 9 was formally the 89 mustang, but I moved it to page 10 and used page 9 for the new pictures.
I have just added a poll 01/19/2006, make sure and leave your vote on it, so I know what you think I should do...
Page 6, 2 new animations up (1/19/2006)... Check it out!
Page 8 Updated 01/27/2006
Page 4 Was updated 01/19/2006 (Got some pics from my friend when he and another friend saran wrapped it. I had my own up but he got the best ones...)

_________________________________________________________________________________

Current Mods...
Raybestos Quiet Stop Ceramic Front/Rear Brake Pads.
MSP Intake with a 9 inch K&N filter.
1999+ GM Coolant Tank.
180* Thermostat.
Painted Diagnal Braces, Engine cover, and Fusebox cover, all in Metallic Blue.
Blue EL Wire around dash (currently off for the Sirius radio install.)
Xact SIRIUS Satellite radio receiver.
Debadged Trunk
Rear Bumper Silver Reflective Inlays.
Medium Blue Reflective GTP Supercharged Overlays.
Handmade Grilles.
Luminics Xenon style headlight bulbs.
EuroDesignz fog light bulbs.
Wire loomed Engine Bay, and Trunk Wires, in Blue.
Trunk accent light with a slight blue tinge.
Rear side windows "Eaton inside" chrome decals.
Windshield "GTP Supercharged" medium blue decal.

_________________________________________________________________________________

Future performance mods...
Down Pipe and U Bend Delete and High Flow Cat (all in 1.)
Autolite 104s with .60" gap
Ported and polished manifold
Modular pulley with 3.25" pulley
DHP PCM
75mm Throttle Body

To get a better deal on the above mods, I am gonna get the WbodyStore stage 1 performance package, it includes,

DHP Version 1.0 PCM
W Body Store Modular Pulley kit
W Body Store 3" Downpipe
Autolite 104 Copper core plugs
180 Degree Thermostat
3.5" Tensioner Pulley
All of the above mods for $389.99

I still need the ported and polished manifolds, ubend and high flow cat (I could get the u bend delete with the downpipe, but it's on the cat I'm buying from a grand prix club friend.) Manifolds at $199 from w body store, and high flow cat with ceramic coating at $125, 75mm throttle body is $399.99

400
390
199
+125
= $1114

As opposed to around $1270 or so. (Thats without a pulley puller though.)

_________________________________________________________________________________

I had noticed recently I had my year wrong... I have been messing with this page for months and haven't noticed my year was wrong. Had to fix that.

_________________________________________________________________________________

I was thinking about buying some rims, I photo shopped the rims I'm looking at, onto my car, check it out and leave your opinion of them in my guestbook! BTW, the wheels are 18s, the size of the ones I photoshopped onto it are 16s, so they will look a little bigger (and better IMO.)

Faqs:

1: Q: How did you paint your engine components (cover, braces,fusebox cover, etc.)

A: I taped off the stripes, "Supercharged" "3800 Series II," trimmed off the excess with an exacto knife (use a scalpel if you can get one, but use an exacto knife if you don't want to look all over for one... Plan to spend about 1-2 hours to trim all the tape off correctly. I took extra care doing it, you might be able to do it a little more quickly though.) Sand it down lightly with fine or medium grit sandpaper. Tape and newspaper off the underside of the engine cover (cover the oil filler hole and trim off the excess, then tape off the underside of the hole in the middle that holds down the engine cover to the supercharger if applicable) and fuse box (I didn't paint the inside of the fuse box because the fuse diagram.) Sand down the diagnal braces with course then medium then fine grit sand paper to do the braces right, but if you really wanted to just paint over the black braces (it will come out almost just as well, just won't stick as well, so allow a longer drying time...) I did a clear coat over the metallic blue coats to give it a little shinier appearance. Oh yeah, also... When you paint the engine cover on the front side, with that big slant, do light coats on it, so maybe 5 coats accross the whole thing to get the front to come out right, you might be able to get it done in 3 though, just be careful, you might have drip problems... Let it dry for about 3 hours before moving it, then if you want you might be able to put it back on after 4 hours, I would wait over night or as long as possible (like if your no going anywhere for a couple days try to let it continue to dry for as long as possible, it should dry for as long as you can hold out... Up to 7 days if possible... I put it on well before 7 days but it takes about 7 days to FULLY cure.) Good luck with that project if you plan to try it, and if you do decide to do it, come back by and drop me a line and let me know so I can see how yours came out.

2: Q: Where did you get your blue wire loom?

A: I had a local speed shop called KC Customs (use to be KC Trucks) order mine in, and picked them up about 2 days later. Got about 50 foot of different widths of wire loom (still have around 15 foot left total.) I would reccomend 3/4th inch and 3/8th inch wire loom to do your full under hood, you could go a little smaller on others if you wanted to (inside my engine bay on the left side theres some real thin wires that you I covered with 3/8ths wire loom, if you wanted you could go a bit smaller.) If you want some wire loom, just call around to some local speed shops, you should be able to find one that will order you some in, about 50 foot for about 20 bucks, or you could order from street glow, its like 15 bucks and about 15 bucks shipping though... You can try them if you want. I would use them but they are too expensive for the same stuff I can get from the other guy for a bit cheaper. Your paying for the name, just remember that...

_________________________________________________________________________________

This page is the first pictures I have taken of the car, if you want to see the car how it looks now, I suggest page 4 and 8 be the first places to look (I prefer page 8)... This page does this car no justice, for anything I have done to it... This only goes up to like the first week of pictures and mods of the car (air intake and grills is about all you will see on this page as far as mods...) So please move on to page 4 and/or 8 if you don't look at any other pages atleast check those two out. Please leave feedback in the guestbook, all feedback is read daily...

_________________________________________________________________________________

I wanna give a shout out to my boy Sal Cannistraci Jr., he's been giving me suggestions and tips on my future mods. Check out his ride at the car domain I recently made for him, as well as his club GP page.
Here's the car domain page

Club GP page.
Many props to him for his awesome now turbo GTP!

Heres a pic of his ride, if for some reason you don't wanna look at his page (Theres no reason not to look, its prolly one of the best, if not THE best lookin Grand Prix around.)

_________________________________________________________________________________

I have done a few mods here and there, nothing too big, I have a cold air intake, Bright white headlights and fog lights, custom made diamond plate PCM Tray, and EL wire, blue wire loomed alot of the cars wires, debadged trunk, put silver reflective Pontiac decal inlays in the back bumper, put medium blue "GTP Supercharged" overlays on the side badges, painted the engine cover, diagnal braces, and fusebox cover all in metallic blue... There might still be a couple small mods here and there (if I'm forgetting anything its just something for show.) The new images are on the next couple pages, so scroll to the bottom and click page 4, 8 and 9 (9 is the newest)... I don't keep my pages in order of mods, I keep it in the order I see fit, I put em up pretty much in order that I took em, but not like new stuff first like some people do, I put em where first pictures take first etc. so just look around, its not hard to figure out. Bottom of the page has a listing of whats where, so use that as your guide and enjoy! Also, just letting you all know, you might wanna add me as a friend, I will add mods pretty often, it might not be a big mod (for now...) but there will be mods for looks, like emblems and such... So check back often, and don't forget to sign the guestbook!

Had to get a neighbor kid to stand infront of the heads up display, it wasn't showing too well in the light.

The girls... Z28 and the GTP

Heres My first mod, air intake (need to put more piping on, but I did get the air filter in.)

Took a lil bit to get the air box loose because the stock filter was stuck in there. I got it done in about 45 minutes, but I will take the rest of the air box out later, I didn't know were to put the PCM so I left the box in to keep it in, but I will remove it when I add the pipeing.

I got a new grille installed, I still gotta put the bottom grills in, will get to that a little l8r.

Be sure and sign the guestbook, to let me know if you have any comments or suggestions, all input is helpful and taken into consideration!
_________________________________________________________________________________

Heres my other page, with my '97 Z28, as well as a few other cars, 77 Custom Show winning Camaro, a decently modded Rx-7 and my bros beamer. That was when we were still located in Memphis Ten.

Check it out here...

Page 1: '98 GTP.
Page 2: Night pictures.
Page 3: Covered in snow...
Page 4: New Pictures.
Page 5: Wish List...
Page 6: Animations of the car.
Page 7: Videos of the car.
Page 8: New pictures 2. (Updated: 04/10/2006.)
Page 9: "Show like" pictures.
Page 10: '89 5.0 Stang.