1996 Trans AM
Here are a few pics so far that I have. I will have more detail to this project later.
Here are some flow #'s from my Dart Pro-1 230's ported by LME
Intake 2.08" Exhaust 1.60"
Lift Intake Exhaust
.100 73 68
.200 146 98
.300 209 143
.400 252 177
.450 272 187
.500 293 196
.550 309 206
.600 323 212
.650 326 218
.700 331 223
And yes of course the car still has to be re-painted.
WS9 Hood from USExotics
The Intake you see in the Pic is a Super Vic with a 100* elbow and AccuFab 90mm TB. The elbow was machines 1/2" and intake 1/4" to make clearance for the hood. Cam is Hydraulic Roller 242/249 at .617 lift on 110LS, Morrel lifters, Pro Mag 1.6RR, Elec. Water Pump, Cloyes True Roller, Canton Race Oil Pan and many more
396 Block - Machine work done by LME www.latemodelengine.com Houston Texas
This of course is with the old setup. The new setup I went with a custom fabbed intake elbow and an AS&M 58mm Throttle Body.
I have put 440/420 to the wheels. It has much more, we'll see what happens.
