E-mail me at:
ratio411@yahoo.com

Want all 4 headlights to come on when you run highbeams on your Camaro?

Directions:
4 screws under the driver's side dash allow access under the steering column. Look down the left side of the steering column and there is a white switch with a brown plug and 2 black tabs. Squeeze black tabs and pull the connector off. Make a jumper connection between the large tan wire and the large yellow wire and put everything back together...
Tip: I used an inline fuse housing as a jumper. The flat fuse housing type with heavy wire ends. This became the jumper wire between the tan and yellow wires as instructed. The inline fuse housings are available at Wal-Mart (or about anywhere), with a 30 amp fuse. That's what I used, just for safety.
Good luck
Dave

*Note: This mod has worked just fine, long term on my car. Don't blame me if you have problems. I have already had one person that did not read the directions properly and did the mod wrong. He didn't damage anything, but he spent time trashing me for his own screw up. Do it properly, do it at your own risk. Have fun.

Pages:
1) Pics
2) How to get your own Dynomouth exhaust
3) How to get all 4 lights on when high beams are on
4) How to allow foglamps to run even when high beams are on
5) How to dump the DRLs
6) Misc appearance mods
7) Misc pics