THIS VEHICLE WAS SOLD AND I RECENTLY PURCHASED A VOLVO S80 T6
Page 2: CUSTOM INTAKES, LOOK HERE FOR THE LATEST INFO ON ENDEAVOR INTAKES
Page 3: HID CONVERSION KITS
Page 4: AUDIO / VIDEO SYSTEM, & STOCK SYSTEM SPECS
My Truck is comming along, I have been in Germany for a little over a year now, and it takes forever for parts to ship let alone find carriers that will ship over hear, but they are slowly starting to come in. Right now the only mods are a K&N intake, Upgraded Exhaust, and I used a power programmer to tune Air/Fuel as well as the transmission to get a little more pickup and power.
I finally put on my 20" Baccarat Passions! But my son broke the digtal camera last week, and my Wife curbed the whole passenger side with about 6" rubs on each... she was ran off the narrow road to our house by a tractor. No excuse in my book, and as a result no pictures.
I recently came accross some useful information... The Endeavor will hold a max wheel of 22" x 9.5" and a max tire of 265 x 760.0 so now I have the urge to get some double deuces! Sucks that the insurance won't cover the damage but I am getting new wheels just probabbly not before winter so for now I am rolling stock again. But here are what I am thinking about 2 choices:
22" Gianelle Milos 6 w/ Black Cap
OR
22" Zyoxx ZX8 w/ Black Inserts
*********************************************************************************************************************
I am working on modding the console to hold a Kenwood touch screen with navigation, build a custom spare tire well enclouser to house 3 10"'s and am trying to figure out where to mount my recently aquired 15" LCD.
Check out the Audio / Video page for more details!
*********************************************************************************************************************
I've had the Sylvania SilverStars for about a month now and am not to thrilled with them, so I started looking for something better and found an HID conversion kit for the 9007 bulb. I found quite a few different places that sell them but
PlasmaGrage.com finally sold me on their Dual Beam kit.
Check out the HID Conversion Page for more information!
*********************************************************************************************************************
Finally got my Undercar LED Kit in! I haven't had time to install it yet but the specs. make it sound crazy!
"Million Colors & Multi-function LED Under Car Kit
III. Generation LED
The control box is nuts! You can tell now which end of the car gets lit up & when.
It does 18 color patterns including a million color combinations.
It comes with:
A single remote control Approx 20 mtr
17 functions incl.(5 functions with sound sensor)
5 levels of flashing speed
5 levels of sound sensor sensitivity
5 levels of million colors changing speed
Can work as under car strobe lighting
378 high powered III. Generation wide angle LED's
36" x 2 LED tubes for the front and rear
48" x 2 LED tubes for the sides
Power: car battery ( DC12V)
Memory of last selected program. All necessary mounting hardware,Installation instruction included, RISC microprocessor control module, All controllers are adopted with SMD technology. Double waterproof, suitable for any tough weather.
I got this kit from LED Shop Online
*********************************************************************************************************************
The exhaust was custom made, I will get a pic of it from underneath the next time I have it on a lift. It's a cat back "Y" Pipe (but I plan on changing to a higher flow cat when headders come out), 3" Stainless Pipe, and two Remus mufflers.
It sucks but I may have to change my mufflers to the split type or drop back down to a single exhaust, the heatshield that was installed has been ineffective and I am starting to notice some heat damage on the electronics under the Left quarter of the car. I am going to try some other shielding material first but it may come down to going single. If I do change it I will use a pipe like this (but opposite set-up).
*********************************************************************************************************************
Intrax makes a 2" front, 2" rear drop. I am undesided as to wether or not I am going to get this yet, I would like to see a few that have been dropped before I commit to the change.
Many more mods in the near future, as well as progress pics as soon as I can unpack and find my digi.
*********************************************************************************************************************
I recently saw the front end for the '06 Endeavor and am working on getting the new front end from Mitsubishi by January.
While constantly researching what vanity products exist for this beast... I have found, according to the Mitsu dealer the spark plug / intake manifold cover off of the '04 6G75 Galant (North American Model) will fit on the Endeavor...Take a look!
I have discovered it is nearly imposible to order this cover from any aftermarket resource, but good news I have the factory part number and you can order it from any North American Mitsubishi dealer. It is alot cheaper than I was originally quoted ($150) they were trying to sell me the intake manifold for the Galant. Any ways the part number for the cover shown above is MN153419, and retails for $52.82. This quote came from the dealership I bought my Ende from you can contact Mike Riddle Mitsubishi at (801)-298-8868, ask for the parts department, their service is great, and they usually ship the same day if you call early enough!
