because i now have to apply pressure to disc and drum brakes much larger than factory something had to be done with the brakes. After considering pressure valves to hod the line pressure i made the mistake of decxiding it was to hard and should just fit the nissan booster and mastercylinder unit.
ROCKY VS NISSAN
my new problem is due to the extra diameter of the booster it hits on the steering uni on the firewall. i have discovered that by removeing the splined section from the bottom of the steering rod and welding sleeving around it, the uni is pushed out from the firewall enough to clear the booster
PICCEY TO COME
Rear Draw & Bar
i made a drawer slider system for the rear of my daihatsu. the drawer was made to fit between the wheel arches, and the roof to cover the arches giving me a flat shelf to rest recovery equipment on for easy access. once completed i removed the drawer and shelf so they could be contact sprayed and carpeted for a professional look.
i flipped the old towball mount upside down for clearance and
welded on a length of RHS which shall be incorperated into an exo cage later on.