Page 1-Latest Mods
Page 2-Exterior
Page 3-Exhaust System
Page 4-Engine
Page 5-Interior/Speaker Box ~~You Are HERE~~
Page 6-Wheels
Page 7-Suspension
Page 8-Coming Soon
*
*
*
*
*
.cink{font-size:10px;font-family:tahoma;color:a9a9a9;font-weight:normal;text-decoration:none;}It Don't Matter Video - Rehab lyrics
Rehab Music Video CodesMusic Video Codes by VideoCureMyspace Layouts
*
*
*
*
*
*
On the inside I have
APC white face gauges
APC white face heat/ac cover
A panasnic headunit
(2) Sets of Rockford Fosgate P152S Componenet Sets
(2) Sets of Rockford Fosgate P162S Componenet Sets
(1) Pair of Rockford Fosgate P163c Coaxial Speakers
(1) Pair of Rockford Fosgate 4" Rear spaekers
(2) 8" Rockford Fosgate Subs in a sealed enclosure
(2) Rockford Fosgate P1S410 10" subs
(2) Rockford Fosgate P400-4 4 Channel Amplifiers
(2) 500 watt Rockford Fosgate 2 Channel Amplifiers
(1) Rockford fosgate P300-1 Mono Channel Amplifier
(1) 10" Audiobahn Natural Sound Subwoofer,
2 white neaons located just in front of the sunvisiors
A 20" blue lightning neon tube behind the Custom box.
*
*
*
*
Soon to be stuffed in each door will be 4 speakers and 8 tweeters will be spread throughout the cab.
Also a Rockford Fosgate P400-4 amp will be put in each door. And Custom Kick pannels will hold a componenet speaker and a tweeter.
*
*
*
My Creation is a Center Counsel/Sub Woofer Speaker Box.
First time I have ever built anything with fiberglass...
*
*
*
*
This is how I started is with a cardboard template
*
*
*
*
*
*
A few pics of the bare floor and a shot of the old box.
*
*
*
*
*
*
This part of the floor was kind of uneven so I decided to lay a piece of MDF there and mold the fiberglass to it so the bottom would be a little more level with the floor.
*
*
*
*
*
Then I taped off the floor really well. Then I taped down a layer of aluminum foil. Then I layed fiberglass matting down and coated it in three coats of resin.
*
*
*
*
*
*
It was only in the 30F-50F when I was doing this, so I had an electric space heater I used to help speed up the hardening/drying process.
*
*
*
*
*
He is a shot of the piece I molded to the floor, I only took a picture of the piece upside down I guess I just forgot to get a pic of it right side up.
*
*
*
*
*
*
This is how I went about attaching the MDF pieces that I cut out using the cardboard templates.
*
*
*
*
*
*
This is how I made the top and cut recessed holes for all three Subs. Also how I ran the wires and made the box somewhat smoother....
*
*
*
*
*
*
I used a piece of paper that I made a tube out of to help me run the wires through the box.
*
*
*
*
*
This is how I reinforced the top using some scraps of MDF I had.
*
*
*
*
*
*
I then covered the whole box with a cotton polyester blend of fabric I got from the fabric store.
*
*
*
*
*
*
Then I coated the box with several layers of resin and fiberglass weave.
*
*
*
*
*
*
*
Then it was time to sand it down nice and smooth and fill in any low spots and imperfections.
*
*
*
*
*
*
*
This is the final product I only used primer right now because it is too cold to paint it yet.
*
*
*
*
*
*
I put my 20" Blue Lighting Bolt Neon above my Custom Speaker Box Just For Kicks.(Really because there was no where else to put it and it cost like $50 so I had to do something with it) I plan on doing a fiberglass cover for the amps and neon with some more component speakers built in, then the neon might look cooler through a Plexiglas window or something.
*
*
*
*
*
Once I got it built I didn't like the way it set up against my dash, so I added a peice on the front, and then I had to cut a section out of it so it would fit in my truck.
Then it was primer time, and then I sprayed it all with dogde dakota silver
Then I taped it of with some 1/8" wide 3m tape
Then I taped the top half off with masking tape and layed 3 coats of dodge dakota black paint.
Then I pulled the tape off of the top half to reveal this...
Then I taped the black off with masking tape and layed 3 coats of intense blue A dodge dakota color as well.
And the final product
Then back in the truck I put FATMAT down and began the chaos of building another fiberglasss enlclouser again......
I am nearly there, I am in the process of adding an aditional piece to the top so it fits better against the back wall. And I have to do som trimming and sanding, but we are nearly there.
Here it is all finished. Primer, then paint
I have taken all my interior out, sanded it and painted it....
Headliner, Visors and a few misc. parts
All accessories are hooked up to switches that are mounted on the custom speaker box.
2 RockfordFosgate Amps 1 behind each seat.
My CrimeStopper Security Alarm Light to keep all you theifs out!
Some Cheesy Floor Mats,but hey you got to keep something on the floor.
My Precious IPOD! God, How did we survive without these things for so long?
My Fuzz Buster because FTP and how else do you avoid tickets?
********************************************************************
If you like my Ride CLICK HERE.
Link text
********************************************************************
Page 1-Latest Mods
Page 2-Exterior
Page 3-Exhaust System
Page 4-Engine
Page 5-Interior/Speaker Box ~~You Are HERE~~
Page 6-Wheels
Page 7-Suspension
Page 8-Coming Soon
