DON'T FORGET TO RATE YA BOY
**Check out my video in my garage**
This is my 1981 Cutlass Supreme. I got it 4 cheap (as you can tell) it needs a lot of love and tlc. The person I got it from said it was a 442, I think it's a supreme with the 442 options cause the 442 was dropped in 1981 and then picked back up in 1985. I think i got lucky cause there was not a lot of these made with the 442 options In 1981 and if so I have a rare car.
I GOT A JOB AT A BODYSHOP SO I'M STARTING TO WORK ON IT AS MUCH AS I CAN AFTER WORK.
RIGHT NOW I'M IN THE FIRST THE STAGES OF GETTING THE CUT-DOG ON THE ROAD. HERE ARE A FEW PICS I TOOK WHEN I GOT IT.
I'LL KEEP PUTTING UP PICS AS I GO SO BE ON THE LOOK OUT.
AS YOU SEE IT'S STILL A MESS BUT IT'S COMING TOGETHER. IF YOU'RE GOING TO DO IT RIGHT YOU NEED TO GET DOWN TO BARE METAL.
MY TRUNK WILL BE LINE X TO KEEP THE SOUND IN THE CAR, NOT OUTSIDE THE CAR LIKE YOU MIGHT HERE IN A LOT OF OLD SCHOOLS.
Got this stuff called red brown, it helps stop rust. If you know g-bodys they're known for rusting.
Then i added a spray poly to help smooth out any waves in the body.
Getting the car ready for the red brown and spray poly.
I SHOULD BE GETTING MY NEW FRONT COVER IN A FEW DAYS AND MY REAR COVER IN A WEEK OR SO. IF ANYONE OUT THERE HAS ANY IDEAS ON WHAT I SHOULD DO NEXT PLEASE LET ME KNOW.
I DROPPED OFF MY FRONT AND BACK SEATS TO MY UPHOLSTERY GUY MR.R'S (THE BEST IN KANSAS)
I HAD TO GET A DASH OUT OF ANOTHER CAR CAUSE MINE WAS ALL CRACKED UP.
GOT A BUDDY TO COMPLETELY REDO MY SUSPENSION FRONT AND BACK AND LIFT IT BOUT 5'' SO I CAN PUT THEM BIG BOI'S ON THERE. SHOUT OUT TO LLOYD MURPHY ON THE LIFT 40+ YEARS IN THE CAR GAME THE MAN KNOW'S HIS STUFF.
I got the hotchkis suspension kit, a must have if you're going to be doing what im going to be doing, and that is acting a fool in the streets.
I ALSO GOT THE INSIDE OF THE CAR LINEX FROM FRONT TO BACK AND UNDER THE CAR SO I WONT WORRY BOUT CAR CANCER AKA RUST
I'll put more pic's up as i go, I've got a lot of work to do but it's coming together...slowly..... very slowly.
Got it all primed up and bout to head to the motor shop to get the heavy chevy put in.
the old 307 and trany say bye bye.
Now that the engine is out time to get clean.
Now that she's all cleaned up the heavy chevy is ready to go in.
This my 350 block that i got out of a Iroc camaro and is now bored out .30 over. I also have Hi preformance heads from a corvette. I have a lot of up grades i will add when the motor is done.
Here is the dress up kit i got and some wire covers. Got to have it lookin good ya dig.
The motor is almost done I still needs to get a few things before it goes on the dyno but its coming together.
Got it on the dyno just breaking it in before we put it in the car.
Got the motor in the car and it looks good. I still got a little more work to do before its ready but the motor should be all done very soon.
Got the cutty back to the shop and the motor sounds like a champ. This baby is going to turn some heads. Shout out to my engine dude Mike Grady on all he did he got ya boi right.
This month i hope to start getting it ready to paint. The summer is right around the block gotta get a move on.
Got my 24's on today just to see how it looks.
I'm cutting it pretty close in the back but I should be cool... I hope
I think i was cutting it to close in the back so i called PMT Fabrication out of texas and had them custom make some adjustable upper and lower rear control arms.
Now it looks alot better.
If you have the same problem i did with my rear arms you can call PMT at 214-592-2308 and they can make what ever you need.
I had to trim my fenders a little bit so i can turn. Shout out to my dude Eli on the trimming my shit.
You can't really tell that i trimed it can you... thats how its post to look.
Here are a few pic of it getting ready to get wet.
Got it all jamed up. Shout out to my boi tony ines on jamin my shit
Finallay got some paint on the cutty. Even the sliver base coat is wet.
Going to try to get it all painted up by the end of the week so b on the look out.
Well here she is nice and wet. Shout out to my man's Larry Smith aka "Candyman" on the paint job the man know's how to lay it down.
Here are some pic's of her out in the sun.
The sliver we put down really pop's kinda hard to see in the pic but in person W.O.W
Im goin to try to get it all together sometime this week then it's time to get my upholstery put in.
Got it all put together and its at the upholstery shop i took a few pic of the work so far so yall can see the kind of work they do.
Did something sick wit the dash tell me what you think. Shout out to my boi kyle on my gauge cluster the boi is cold wit it.
And then there was light.
I couldn't wait i had to put the wood in.
Thats just a little skeet taste much more to come.
It's all most done still got work to do. Here's some pic after i got it back from the upholstery shop.
Put the flip down in 15.4 wide screen for the hater vision.
I'll keep yall posted. It's finally coming together all most there.
Got it all put together and got her on the road. Still need to get it buff but thats it.
Here's a few pic of it in the Labor Day Parade.
A pic of the 3 King's of the cutty game in my city me my boi wane aka "King Tuck" in the blue cutty and my boi kyle in the jolly rancher cutty.
