This the Cheapest and the Best DIY if you wanna have this look. Check out my car car at http://www.cardomain.com/ride/2039908 for more pictures.

Theory:

The 7th Gen Accord has LED soldered to the circuit and its hard to change the bulbs. I thought if we add a blue tint behind the gauges, it will give nice results and will be cheaper and easier.

Disclaimer:

Please be careful when doing this. Dont blame me if you break something while doing it. I tried to be as precise as I can but might have forgot something. Feel free to ask me if you have any questions.

Page 1> Removing the speedometer
Page 2> Deassembling the Speedometer
Page 3> Applying the Film
Page 4> Applying Film to the CD Player Screen

Tools:

1. Philips Screw Driver
2. Blade
3. Scissors
4. Rubber or latex gloves
5. Lots of Patience
6. High temprature blue film(seller's email paperstplastics@aol.com , Ebay Item number 7304281645) If you cannot find this seller, just search for "High Temprature Gel Sheets" on Ebay or try your local Stage lighting or Hardware store.

Cost:
Under $10

Removing the Speedometer

Lets start by removing the gauges assembly. Remove the 2 screws on top of the speedometer.

Gently pull the cover out. There are 2 clips holding it from the inside on the bottom

Remove the connector and pipe the right side of the cover and completely remove it.

Now remove the 2 screws from the bottom

One screw from the top

Unplug the Green connector from the Gauges and gently pull out the whole assembly

Pictures of Gauges, front and back.