My truck, a 4x4 Chevy 1500 Standard cab, stepside bed. It has the Z-71 package as well as the Silverado trim. It is powered by a 350 Chevy V8. The engine is said to have roughly 210 hp and 300 lbs of torque.
When I first bought this truck, it had already been modded by its previous owner. I actually got to meet the guy alittle later after having the truck for some time. He had a Grizzly grill guard and roll bars put on the truck. On top of the roll bars are four KC daylighter fog lights. He also had the torsion bars cranked so that the front is lifted about 1-2 inches.
When I got the truck, I started with my own modding. I got a K&N air filter, clear parking lights and turn signals. I removed the set of side steps that were bolted on to the side of the cab. I also removed the plastic trim piece that hangs under the front bumper.
Eventually I got a third break-light cover that lights up Z-71. I recently put on taillight covers that give it the impression of a jagged edge around the taillights. And finally i got a Chevy bowtie hitch cover that lights up.
Before the first winter of me having the truck, I upgraded the stock tires with a set of BFG All-terrain TA Tires. They are slightly bigger then stock and are 285/75R16. They fit fine in my wheel wells and have no trouble turning.
The exhust was already done by the previous owner. He had a single Flowmaster setup where it exits from both sides of the truck at a diagional angle. It isn't crazy loud and is a very nice tone for daily driving.
The interior is a split bench seat. My HU i put in it is a Alpine 9825. I have Polk 4x6 in the dash and in the back.
Here is one of the best pics of my truck so far. It is before I took off the brushguard. I have since given that to my girlfriend's truck.
