Wheel Tires & Suspension.
Stock wheels vs. 19's
Axis Hagen - 19x8 Chrome, Wrapped in 225/35/ZR19 BFgoodrich Scorchers.
GOT NEW TIRES!!!
I bought brand new BFGoodrich G-Force KDW's.
Anodized Blue calpiers, and drums for now until I can afford a UPGRADE.
Soon to be riding on AIR!
Now they look better.
Spring seats and bearing plates were modified to sit flat and level on airbag.
Look at the rear sleeve bags installed
and the front strut bag
The front tires rest on the edge of the fenders, 19x8 up front is not gonna tuck :(
The front end is hels together a little more thanks to a Ractive Polished strut bar.
Pics of AIR RIDE coming May 2006
5/11/2006
Air Ride consists of:
5 gal 4 port CHROME tank
(2)Viair 450C Chrome compressor
Viair Dual Needle gauges (x2)
Blue Tinted swicthbox
1/2" lines
3/8" SMC Valves
1/8" line for gauges
Viair 110/145psi Pressure switch
Sittin on New Nitto NEO GEN 215/35's!
A little DOG LEGGIN!
For 2007: Reworked the Air Ride a little bit. Clean up the wires and re-plumbed a few things.
Used a Barrier strip to attach the valves to the switch box wires. This way if a Valve malfunctions a Swap out will be very easy.
4awg Power and Ground supply power to my valves and compressors. From the JL AUDIO Distirbution blocks my Valves and Relays a Grounded. Also 8awg feeds the Relays to the compressors which are ground to the chassis.
A pic of the Valve board I made to fit in the spare tire well. I didn't want to see the valves of wires and this will make my install of the Chrome tank and compressors look nicer.
August 2007 - The valves are now under the car. The compressors are in the spare tire well.
Page 1: Newest Exterior pics
Page 2: Interior and Sound system
Page 3: Wheels Tires & Suspension
Page 4: Engine Dress up & Performance
Page 5: Car Show pics
Page 6: Exterior pics
Page 7: 2002 System pics
Page 8: 2003 System pics
Page 9: 2004 System pics
Page 10: 2005 System pics
