-PHILIPS HEAD SCREWDRIVER
-(2)FLAT HEAD SCREWDRIVER
-SIZE 7MM SOCKET DRIVER
Remove two philips head screws from above gauge cluster.
Starting from the far right edge of the dash panel using the flat head screwdriver gently pry up. When a gap large enough for your fingers is present you can use your hands to bring up the rest. Use caution on the left side near the fog light switch because the retaining clips are part of the switch assembly.
Retaining clip positions.
Remove all wiring harnesses.
Remove four 7mm bolts retaining the gauge assembly. To remove, tilt the bottom out and pull out on the left hand side first. (Tilt wheel, ensure the wheel is in the lowest position for ease of removal.)
Remove the gauge assembly wiring harness from the upper right corner.
Push in and up on latches to remove gauge window.