This is the original eBay description followed by my mods.
Ive aquired this Samurai from a friend who owed me money. Everything is stock except the 31 inch tires. The front fenders have been trimmed to solve clearance issues. (Although the tires still rub gently on turns). The ass end was also trimmed to fit the 31's and he got a little sawzall happy and decided he wasnt gonna have another back seat driver in this rig ever agaian. The motor fires right up and runs excellent. The tranny and transfer case all work great. All U-joints and driveshafts are good. The 4x4 works also. The stock head lights dont work but previous owner installed aftermarket lights that do. The frame has no visible rust that i can find, its surprisingly very clean. a good candidate for a frame up restoration, a mean machine with a custom roll cage, or just wheel it as is... its ready to rip. Now the list of problems. Brakes pull to the right a bit and dont work to well. Exhaust is cut off from the headers back( i think). There are holes in the floor boards. The front windsheild is cracked. One wiper is missing ( passenger). The soft top is missing. And the batterie needs a strap. Please bid with confidence this is a very fun toy. if you have any questions please call 860-490-1340 ask for shaun. buyer must pay with certified bank check or cash only, within 7 working days I can deliver for a fee. i can also help arrange shipping. buyer responcible to pay shipping
1) converted the cut-off brake lines to functioning ones by replacing them and removing the vice-grips from the brake hose.

2) brand new master cylinders and pads in both rear brake drums

3) custom wood bed

4) rear bucket seats from an S-10
5) rear lap belts from 80's BMW 318i's

6) 1 pint of rust-o-leum gloss sunburst yellow from home depot ($7.50)

7) pvc snorkel

8) new clutch disc and plate after 2 outings

9) aerosol undercoating on the floor, rear half of frame, snorkel, and front grill.

10) chicken wire windshield

11) custom front bumper welded from 1" square tubing and 2" angle iron
