.IM DOIN IT BIG AT 17 :)
man behind the wheel
yyyyuupppp them 4z
BEFORE
AFTER 
alil somthin i did
box i made
4-12's i have
4"hood scoop ima have
tweeters i put in the doors
center console i made
a rear center console i made
(for 2 mtx 6.5)
speaker box i made for 2 more 12's its ghetto but i gets the job done :)
(my bad for the bad pic my phone was covered in saw dust)
more mtx 6.5s
ABOUT TIME I GOT MY SECOND PAIR OF 12z
amp for my mids and highs
amp rack i made still in progress
a box i bought
my motivation whips
I SAW THE LIGHT AND I THINK I WANT TO MAKE MY CAR A RUNNER ALSO
I GOT A 305 NOW I PLAN ON GETTIN A NEW 350
GM Performance Parts 350ci / 330hp ''350 H.O. Deluxe'' Engine
330 HP @ 5000 RPM, 380 ft.lbs. Torque @ 3800 RPM (Max. Recommended RPM: 5500)
9.1:1 Compression Ratio
Cast Iron 4-Bolt Block with One-Piece Rear Main Seal
Nodular Cast Iron Crankshaft
Cast Aluminum Pistons
PM Steel Connecting Rods
Cast Iron 64cc Chamber Vortec Cylinder Heads with 1.94'' Intake and 1.50 Exhaust Valves
Dual Pattern Cam, Lift: .435'' Int. / .460'' Exh., Duration @ .050: 212� Int. / 222� Exh.
1.5 Ratio Rocker Arms
Recommended spark plug- Accel 111-516 or any spark plug with 14mm, .708'' reach, 5/8'' hex, tapered seat, projected tip 
330hp
380 ft/lbs
GM Performance Parts 350ci / 350hp ''Ram Jet'' PFI Engine
350 HP @ 5200 RPM, 400 FT.LBS. of Torque @ 3500 RPM
9.4:1 Compression Ratio
Cast Iron 2-Bolt Main Block
Cast Iron Crankshaft
High Silicon Aluminum Pistons w/ Offset Pins
PM Steel Connecting Rods
Cast Iron Vortec Cylinder Heads w/ 1.94'' Int./ 1.50'' Exh. Valves
Hydraulic Roller Cam
1.6 Ratio Aluminum Roller Rockers
Aluminum Intake Manifold
8'' Torsional Damper
Long Water Pump
Recommended spark plug- Accel 111-263 or any plug with 14mm, .460'' reach, 5/8'' Hex, tapered seat, non-projected tip 
350 hp
400 ft/lbs
which one do yall think is better?? plz leave the comment in the comment box
PAGE 2 IS MODEL CARS
MVI_2104.AVI
