update as of 2/22/07, Decided I probable should finish my system, and re-paint all my panels. So this page is dedicated to that.
Computer to my car, about to be shaved and primed
Grdinded down the logo, ready to be primed
this was the concept panel painted to see what the paint looked like. It's a Kandy Red Flake paint. Completely done, Primed, Primer Sealed, Painted, and Clear Coated, very niiice
Another Panel Sanded, Im waiting to paint the panels all atonce.
Dual Lock system for my truck bed cover. Now I can shave my tailgate
Ripped the whole front end off. I was molding the front bumper which you can see in the lower left corner of the pic. Sorry for the Dark pic.
re-wiring all my wires for my headunit. The org. wires were old and tough to deal with, It was a bitch doing, there is so many wires
Putting back together my headunit shit
First Pic of the new system. It was built in Aug of 06, I just never took a pic of it. those are 2 diamond tdx 15'' subs baby!!! $1500 right there, plus the $400 custom sub box. If you want the best, gotta pay for it!!! haha
taking the speaker out
th subs with 8gauge wire, instead of 12gauge. Im using stinger wire, and dropping it to 1 ohm stable for max power
Inside pic of the box, you can see how it is ported
Finishing up wiring it. Red wire all around to go with the black interior of the bed
wiring is all done, Just need the amp box built and this thing is ready to slam. Wiring is a bitch to do, but saves so much money if you know how to do it properly!!!
Side of the truck, before the skirt goes on
Measuring the holes 9'' apart from each other
Drilling holes with a 3/8 drill bit
Checking to make sure everything is lined up
underside of my truck to show how the kit is being held together. I used sink screws so it'll hold better
Skirt is on but needs to be adjusted, then from there, it will be molded.