parboy’s 2005 Toyota Tacoma Xtra Cab

The system consists of the following components: -JVC KD AVX1 head unit -Accele LCD5MACB 5" raw monitor -Memphis ST3004 75x4 amp -Memphis MC250d 250x1 amp -Eclipse 8052 5.25" components -Eclipse 8963 6.5" point source -Memphis PR 124d 12" DVC sub -Tsunami twisted pair RCA cables -Stinger speaker wire -Custom 1 cu/ft sub enclosure -Custom amp rack shot of the front door close up of the front door shot of the rear door the remote sub gain control hidden in the front behind the rear seat with edead and the amps custom sub box and amp rack shot from the other side showing the box and amps shot looking back at everything passenger side look at the head unit and screen shot from the rear looking forward close up of the front The JVC headunit is a very nice piece. It has gigamp3 capability meaning I can load a dvd-r full of mp3's and play them in the truck. The video output of the deck sends all the disc information to the remote screen including all folders, tracks and artist/album information. another closeup of the front The install is not quite completed yet. I still need to flush in the accele monitor and build a trim panel to finish out the area behind the seats, above the enclosure and amp rack.

The wife and I recently decided to trade in our older 2000 tacoma and upgrade to the new 2005 double cab tacoma. We decided we needed a vehicle with 4 doors and one that could hold more than just the two of us. This along with our 350z should take care of any situation we need :) The truck is a 2005 double cab tacoma, 4x4, with the TRD sport package. This thing rides so great, you sometimes forget it's a truck. The ride is nice and smooth, with plenty of power on tap for just about any task we need it for. Here are a few shots of the exterior of the truck: **update** I just upgraded to some new wheels and tires. The wheels are Panther Vector 519's size 20x9. The tires are Hankook Ventus ST's size 265x50x20. Please join me on the next couple of pages as I document the audio install.

The wife and I recently decided to trade in our older 2000 tacoma and upgrade to the new 2005 double cab tacoma. We decided we needed a vehicle with 4 doors and one that could hold more than just the two of us. This along with our 350z should take care of any situation we need :) The truck is a 2005 double cab tacoma, 4x4, with the TRD sport package. This thing rides so great, you sometimes forget it's a truck. The ride is nice and smooth, with plenty of power on tap for just about any task we need it for. Here are a few shots of the exterior of the truck: **update** I just upgraded to some new wheels and tires. The wheels are Panther Vector 519's size 20x9. The tires are Hankook Ventus ST's size 265x50x20. Please join me on the next couple of pages as I document the audio install.

The system consists of the following components: -JVC KD AVX1 head unit -Accele LCD5MACB 5" raw monitor -Memphis ST3004 75x4 amp -Memphis MC250d 250x1 amp -Eclipse 8052 5.25" components -Eclipse 8963 6.5" point source -Memphis PR 124d 12" DVC sub -Tsunami twisted pair RCA cables -Stinger speaker wire -Custom 1 cu/ft sub enclosure -Custom amp rack shot of the front door close up of the front door shot of the rear door the remote sub gain control hidden in the front behind the rear seat with edead and the amps custom sub box and amp rack shot from the other side showing the box and amps shot looking back at everything passenger side look at the head unit and screen shot from the rear looking forward close up of the front The JVC headunit is a very nice piece. It has gigamp3 capability meaning I can load a dvd-r full of mp3's and play them in the truck. The video output of the deck sends all the disc information to the remote screen including all folders, tracks and artist/album information. another closeup of the front The install is not quite completed yet. I still need to flush in the accele monitor and build a trim panel to finish out the area behind the seats, above the enclosure and amp rack.

The system consists of the following components: -JVC KD AVX1 head unit -Accele LCD5MACB 5" raw monitor -Memphis ST3004 75x4 amp -Memphis MC250d 250x1 amp -Eclipse 8052 5.25" components -Eclipse 8963 6.5" point source -Memphis PR 124d 12" DVC sub -Tsunami twisted pair RCA cables -Stinger speaker wire -Custom 1 cu/ft sub enclosure -Custom amp rack shot of the front door close up of the front door shot of the rear door the remote sub gain control hidden in the front behind the rear seat with edead and the amps custom sub box and amp rack shot from the other side showing the box and amps shot looking back at everything passenger side look at the head unit and screen shot from the rear looking forward close up of the front The JVC headunit is a very nice piece. It has gigamp3 capability meaning I can load a dvd-r full of mp3's and play them in the truck. The video output of the deck sends all the disc information to the remote screen including all folders, tracks and artist/album information. another closeup of the front The install is not quite completed yet. I still need to flush in the accele monitor and build a trim panel to finish out the area behind the seats, above the enclosure and amp rack.

The wife and I recently decided to trade in our older 2000 tacoma and upgrade to the new 2005 double cab tacoma. We decided we needed a vehicle with 4 doors and one that could hold more than just the two of us. This along with our 350z should take care of any situation we need :) The truck is a 2005 double cab tacoma, 4x4, with the TRD sport package. This thing rides so great, you sometimes forget it's a truck. The ride is nice and smooth, with plenty of power on tap for just about any task we need it for. Here are a few shots of the exterior of the truck: **update** I just upgraded to some new wheels and tires. The wheels are Panther Vector 519's size 20x9. The tires are Hankook Ventus ST's size 265x50x20. Please join me on the next couple of pages as I document the audio install.

The wife and I recently decided to trade in our older 2000 tacoma and upgrade to the new 2005 double cab tacoma. We decided we needed a vehicle with 4 doors and one that could hold more than just the two of us. This along with our 350z should take care of any situation we need :) The truck is a 2005 double cab tacoma, 4x4, with the TRD sport package. This thing rides so great, you sometimes forget it's a truck. The ride is nice and smooth, with plenty of power on tap for just about any task we need it for. Here are a few shots of the exterior of the truck: **update** I just upgraded to some new wheels and tires. The wheels are Panther Vector 519's size 20x9. The tires are Hankook Ventus ST's size 265x50x20. Please join me on the next couple of pages as I document the audio install.

The system consists of the following components: -JVC KD AVX1 head unit -Accele LCD5MACB 5" raw monitor -Memphis ST3004 75x4 amp -Memphis MC250d 250x1 amp -Eclipse 8052 5.25" components -Eclipse 8963 6.5" point source -Memphis PR 124d 12" DVC sub -Tsunami twisted pair RCA cables -Stinger speaker wire -Custom 1 cu/ft sub enclosure -Custom amp rack shot of the front door close up of the front door shot of the rear door the remote sub gain control hidden in the front behind the rear seat with edead and the amps custom sub box and amp rack shot from the other side showing the box and amps shot looking back at everything passenger side look at the head unit and screen shot from the rear looking forward close up of the front The JVC headunit is a very nice piece. It has gigamp3 capability meaning I can load a dvd-r full of mp3's and play them in the truck. The video output of the deck sends all the disc information to the remote screen including all folders, tracks and artist/album information. another closeup of the front The install is not quite completed yet. I still need to flush in the accele monitor and build a trim panel to finish out the area behind the seats, above the enclosure and amp rack.

The system consists of the following components: -JVC KD AVX1 head unit -Accele LCD5MACB 5" raw monitor -Memphis ST3004 75x4 amp -Memphis MC250d 250x1 amp -Eclipse 8052 5.25" components -Eclipse 8963 6.5" point source -Memphis PR 124d 12" DVC sub -Tsunami twisted pair RCA cables -Stinger speaker wire -Custom 1 cu/ft sub enclosure -Custom amp rack shot of the front door close up of the front door shot of the rear door the remote sub gain control hidden in the front behind the rear seat with edead and the amps custom sub box and amp rack shot from the other side showing the box and amps shot looking back at everything passenger side look at the head unit and screen shot from the rear looking forward close up of the front The JVC headunit is a very nice piece. It has gigamp3 capability meaning I can load a dvd-r full of mp3's and play them in the truck. The video output of the deck sends all the disc information to the remote screen including all folders, tracks and artist/album information. another closeup of the front The install is not quite completed yet. I still need to flush in the accele monitor and build a trim panel to finish out the area behind the seats, above the enclosure and amp rack.

The wife and I recently decided to trade in our older 2000 tacoma and upgrade to the new 2005 double cab tacoma. We decided we needed a vehicle with 4 doors and one that could hold more than just the two of us. This along with our 350z should take care of any situation we need :) The truck is a 2005 double cab tacoma, 4x4, with the TRD sport package. This thing rides so great, you sometimes forget it's a truck. The ride is nice and smooth, with plenty of power on tap for just about any task we need it for. Here are a few shots of the exterior of the truck: **update** I just upgraded to some new wheels and tires. The wheels are Panther Vector 519's size 20x9. The tires are Hankook Ventus ST's size 265x50x20. Please join me on the next couple of pages as I document the audio install.

The wife and I recently decided to trade in our older 2000 tacoma and upgrade to the new 2005 double cab tacoma. We decided we needed a vehicle with 4 doors and one that could hold more than just the two of us. This along with our 350z should take care of any situation we need :) The truck is a 2005 double cab tacoma, 4x4, with the TRD sport package. This thing rides so great, you sometimes forget it's a truck. The ride is nice and smooth, with plenty of power on tap for just about any task we need it for. Here are a few shots of the exterior of the truck: **update** I just upgraded to some new wheels and tires. The wheels are Panther Vector 519's size 20x9. The tires are Hankook Ventus ST's size 265x50x20. Please join me on the next couple of pages as I document the audio install.

The system consists of the following components: -JVC KD AVX1 head unit -Accele LCD5MACB 5" raw monitor -Memphis ST3004 75x4 amp -Memphis MC250d 250x1 amp -Eclipse 8052 5.25" components -Eclipse 8963 6.5" point source -Memphis PR 124d 12" DVC sub -Tsunami twisted pair RCA cables -Stinger speaker wire -Custom 1 cu/ft sub enclosure -Custom amp rack shot of the front door close up of the front door shot of the rear door the remote sub gain control hidden in the front behind the rear seat with edead and the amps custom sub box and amp rack shot from the other side showing the box and amps shot looking back at everything passenger side look at the head unit and screen shot from the rear looking forward close up of the front The JVC headunit is a very nice piece. It has gigamp3 capability meaning I can load a dvd-r full of mp3's and play them in the truck. The video output of the deck sends all the disc information to the remote screen including all folders, tracks and artist/album information. another closeup of the front The install is not quite completed yet. I still need to flush in the accele monitor and build a trim panel to finish out the area behind the seats, above the enclosure and amp rack.

The system consists of the following components: -JVC KD AVX1 head unit -Accele LCD5MACB 5" raw monitor -Memphis ST3004 75x4 amp -Memphis MC250d 250x1 amp -Eclipse 8052 5.25" components -Eclipse 8963 6.5" point source -Memphis PR 124d 12" DVC sub -Tsunami twisted pair RCA cables -Stinger speaker wire -Custom 1 cu/ft sub enclosure -Custom amp rack shot of the front door close up of the front door shot of the rear door the remote sub gain control hidden in the front behind the rear seat with edead and the amps custom sub box and amp rack shot from the other side showing the box and amps shot looking back at everything passenger side look at the head unit and screen shot from the rear looking forward close up of the front The JVC headunit is a very nice piece. It has gigamp3 capability meaning I can load a dvd-r full of mp3's and play them in the truck. The video output of the deck sends all the disc information to the remote screen including all folders, tracks and artist/album information. another closeup of the front The install is not quite completed yet. I still need to flush in the accele monitor and build a trim panel to finish out the area behind the seats, above the enclosure and amp rack.

The wife and I recently decided to trade in our older 2000 tacoma and upgrade to the new 2005 double cab tacoma. We decided we needed a vehicle with 4 doors and one that could hold more than just the two of us. This along with our 350z should take care of any situation we need :) The truck is a 2005 double cab tacoma, 4x4, with the TRD sport package. This thing rides so great, you sometimes forget it's a truck. The ride is nice and smooth, with plenty of power on tap for just about any task we need it for. Here are a few shots of the exterior of the truck: **update** I just upgraded to some new wheels and tires. The wheels are Panther Vector 519's size 20x9. The tires are Hankook Ventus ST's size 265x50x20. Please join me on the next couple of pages as I document the audio install.

The system consists of the following components: -JVC KD AVX1 head unit -Accele LCD5MACB 5" raw monitor -Memphis ST3004 75x4 amp -Memphis MC250d 250x1 amp -Eclipse 8052 5.25" components -Eclipse 8963 6.5" point source -Memphis PR 124d 12" DVC sub -Tsunami twisted pair RCA cables -Stinger speaker wire -Custom 1 cu/ft sub enclosure -Custom amp rack shot of the front door close up of the front door shot of the rear door the remote sub gain control hidden in the front behind the rear seat with edead and the amps custom sub box and amp rack shot from the other side showing the box and amps shot looking back at everything passenger side look at the head unit and screen shot from the rear looking forward close up of the front The JVC headunit is a very nice piece. It has gigamp3 capability meaning I can load a dvd-r full of mp3's and play them in the truck. The video output of the deck sends all the disc information to the remote screen including all folders, tracks and artist/album information. another closeup of the front The install is not quite completed yet. I still need to flush in the accele monitor and build a trim panel to finish out the area behind the seats, above the enclosure and amp rack.

The system consists of the following components: -JVC KD AVX1 head unit -Accele LCD5MACB 5" raw monitor -Memphis ST3004 75x4 amp -Memphis MC250d 250x1 amp -Eclipse 8052 5.25" components -Eclipse 8963 6.5" point source -Memphis PR 124d 12" DVC sub -Tsunami twisted pair RCA cables -Stinger speaker wire -Custom 1 cu/ft sub enclosure -Custom amp rack shot of the front door close up of the front door shot of the rear door the remote sub gain control hidden in the front behind the rear seat with edead and the amps custom sub box and amp rack shot from the other side showing the box and amps shot looking back at everything passenger side look at the head unit and screen shot from the rear looking forward close up of the front The JVC headunit is a very nice piece. It has gigamp3 capability meaning I can load a dvd-r full of mp3's and play them in the truck. The video output of the deck sends all the disc information to the remote screen including all folders, tracks and artist/album information. another closeup of the front The install is not quite completed yet. I still need to flush in the accele monitor and build a trim panel to finish out the area behind the seats, above the enclosure and amp rack.

The system consists of the following components: -JVC KD AVX1 head unit -Accele LCD5MACB 5" raw monitor -Memphis ST3004 75x4 amp -Memphis MC250d 250x1 amp -Eclipse 8052 5.25" components -Eclipse 8963 6.5" point source -Memphis PR 124d 12" DVC sub -Tsunami twisted pair RCA cables -Stinger speaker wire -Custom 1 cu/ft sub enclosure -Custom amp rack shot of the front door close up of the front door shot of the rear door the remote sub gain control hidden in the front behind the rear seat with edead and the amps custom sub box and amp rack shot from the other side showing the box and amps shot looking back at everything passenger side look at the head unit and screen shot from the rear looking forward close up of the front The JVC headunit is a very nice piece. It has gigamp3 capability meaning I can load a dvd-r full of mp3's and play them in the truck. The video output of the deck sends all the disc information to the remote screen including all folders, tracks and artist/album information. another closeup of the front The install is not quite completed yet. I still need to flush in the accele monitor and build a trim panel to finish out the area behind the seats, above the enclosure and amp rack.

The system consists of the following components: -JVC KD AVX1 head unit -Accele LCD5MACB 5" raw monitor -Memphis ST3004 75x4 amp -Memphis MC250d 250x1 amp -Eclipse 8052 5.25" components -Eclipse 8963 6.5" point source -Memphis PR 124d 12" DVC sub -Tsunami twisted pair RCA cables -Stinger speaker wire -Custom 1 cu/ft sub enclosure -Custom amp rack shot of the front door close up of the front door shot of the rear door the remote sub gain control hidden in the front behind the rear seat with edead and the amps custom sub box and amp rack shot from the other side showing the box and amps shot looking back at everything passenger side look at the head unit and screen shot from the rear looking forward close up of the front The JVC headunit is a very nice piece. It has gigamp3 capability meaning I can load a dvd-r full of mp3's and play them in the truck. The video output of the deck sends all the disc information to the remote screen including all folders, tracks and artist/album information. another closeup of the front The install is not quite completed yet. I still need to flush in the accele monitor and build a trim panel to finish out the area behind the seats, above the enclosure and amp rack.

The system consists of the following components: -JVC KD AVX1 head unit -Accele LCD5MACB 5" raw monitor -Memphis ST3004 75x4 amp -Memphis MC250d 250x1 amp -Eclipse 8052 5.25" components -Eclipse 8963 6.5" point source -Memphis PR 124d 12" DVC sub -Tsunami twisted pair RCA cables -Stinger speaker wire -Custom 1 cu/ft sub enclosure -Custom amp rack shot of the front door close up of the front door shot of the rear door the remote sub gain control hidden in the front behind the rear seat with edead and the amps custom sub box and amp rack shot from the other side showing the box and amps shot looking back at everything passenger side look at the head unit and screen shot from the rear looking forward close up of the front The JVC headunit is a very nice piece. It has gigamp3 capability meaning I can load a dvd-r full of mp3's and play them in the truck. The video output of the deck sends all the disc information to the remote screen including all folders, tracks and artist/album information. another closeup of the front The install is not quite completed yet. I still need to flush in the accele monitor and build a trim panel to finish out the area behind the seats, above the enclosure and amp rack.