Welcome to My Miata Webby
Kindly rank my rides if you have the time. Thank you.
March 07. In the process of doing a custom paint job of Pearl Gold Overlay over the pearl blue paint. Its a Clear coat of Pearl Gold Satin over the existing Blue pearl paint. Under light, it will reflect hints of Gold. Just need to sort out some details to make sure everything turns out perfect.
8th Feb 07. Engine parts are back and installation are almost completed. Still have some polishing to be done. Pics of the engine are not as shiny as what they are supposed to be.
![]()
Jan 2007 - Re-wrapped my seats and door panels as well as the shift boot and handbrake cover with black leather/blue threadings. Re-install New smoked face meters on the LHS (*water/OilTemp,Air/Fuel Ratio). Installed my new 255lph fuel pump. Short Shifter installed as well.
Also fitting in a new rear torsen fr a 99+ 6 speed NB with a 3.9 rear ratio. This increase the topspeed and make the first gear more "USABLE" at this power level. In order to fit in this 6 spd torsen, You would need to purchase the drive shaft as well as the axels.Went for a test drive and noticed that the first gear is now more useful and much pleasant to dirve with.
The engine will be stripped down and polished and new seals will be replaced.New beefier Rods will fitted in as well for higher boost on the bigger turbo. Tunning has yet to be done, so will update once that is done.
Just got my new Turbo.Its been Ported and polished for better flow.Will be installing it when time permits.
Some recent pics of my miata. Low profile Headlights with wire mesh housing for CAI effect, RX7 AFM. Mods in progress :- Vertical Rear Boot,Hydraulic front and rear boot,HIGH CFM fans with AC Overide switch,custom engine powder coating.
RX7 AFM (lower) vs Miata 1.6L AFM (upper).
A pic of both my friend's and my miata.
Reverse Glow Meter / Blue AirCon Customized Panel / Low Profile Dual Mercury Lens Lights-Customized..
Sorry for the poor quality due hp camera.Dual LowProfile Mercury Lens Lights conversion
Customed AC Panel trims with LCD linked up to a Portable Media HardDrive.So now i can play anything fr JPEGs,MP3s,MP4s to DIVX files.
A few more items had been installed.Front lower tie brace / Engine Damper / Brake Cylinder Stopper / Lightened Flywheel / Hi-Throttle aluminium Pulley.
Front Lower Tie Brace
Close up of the Louvered Pop-up light cover.
Brake Cylinder Stopper kit
Lightened Aluminium Hi-Throttle Pulley -RED
This is the pic of the Engine Damper(Blue) Some retro-fitting is required as the TD-04 was in the way.
Lightened Flywheel
New Coat of Pearl Blue. Black Customed Front Lower Splitter.
Just installed this Louvered Popup light Cover. Nice :)
Custom Painting of some additional Interior (Steering Console/Rear Speaker Console)
Front Lower Splitter - Unpainted at the moment (Customed)
BTW, thanx to all the guys and friends who surf by my website and leaving your compliments and comments.Reading all these comments/emails make all the effort and sleepless nights worthwhile. Appreciate it!
Finally the rear bumper is here and installed.Vehicle is now at the paint shop and should be ready by this weekend. The rear looks very fat and low with the new rear.Very massive and solid kit.
2nd pic shows the side close up. Notice there is an ARC drawn at the diffuser. That portion will be cut and rounded off as i do not like the sharp and too "box-y" look.
Carbon Fiber Radiator Cover
Pics of the New Rims installed, only thing left is the Rear bumper to be installed ... Enjoy
Nite pics. .. so pardon the clarity.
Here are some pics of the latest installation. Installing a new 6 puck clutch together with the Quick Steering Release and Fog Lights.The rims require some widening modifications but it will be all worthwhile. The rear rims gives a very fat and wide look.
The 6 puck clutch and the Bazooka NOS Tube at the boot. Pretty Cool!
July 06
Finally the rims got in and they are really beautiful.The pictures dont do justice, actual item is impressive. 17x7.5 +40 Front & 17x8.5 +25 Rear. Front offset is due to the FD calipers clearance, thus still need to run spacers at the front.
The polish lid is abt 3+ inches deep for front & rear.
Two more items are in and will be installing them over the coming weekend. The Quick Steering Release, fog lights (small) and the Carbon Fiber Radiator Cover
12th June 06
A new rear Full bumper is in order,arriving in a few weeks time. pic shows the photoshop of it b4 paint. Also in order is a full front lower splitter.Hoping to do a Custom flare on the rear wheel to give it a fatter look together when the bumper arrives.
Updated on 22 May 06.
Did some DIY Lazy Eyes.. . Just for Demo .. still have lots to touch up.. here are some pics.
These pics are the latest pics of my ride-25th Nov 2005. Added the New Front Full Bumper as well as resprayed the whole front half of the car.Just need to drop the ride height of my front another 3/4 inch lower and everything should look cool...
Bought the Magnecor's KV85 ignition cables.Many fr forum find that there is a fitment problem, but I find it otherwise.Fits perfectly.
A nice good polish..
-Just installed : RX-7 FD(4port) Front brakes with 1.8L Slotted Rotors conversion.~26mm Wheel Spacers(got this fr a friend at a very reasonable rate.)
When it was still in the paint shop going through a resurfacing job.Wanted it to be REEEAAAAALLLLLLYYYY smooth and flawless.
These are some pics taken on our Convoy drive.Was an excellent trip... Car was However .. very DIRTY
Some pics of my Miata. In order to match my Toyota Wish, I've also resprayed my Miata to the Pearl Metallic Dark Blue as seen in the pics below.
Finally the bonnet is here and installed. However am not too pleased with the finishing. Will be sending the bonnet for another round of smoothing and respraying to get the mirror like finishing. So now just waiting for the New Front Bumper to come in ... .
Finally also got my HardTop and had it spray painted to my Pearl Blue.
Got a New Momo Gear Knob as well as a Isotta Hand Brake Level to replace my existing ones. My wife finds that its kinda to "Loud" and "Bling Bling" but well, since I've already spend the money on them, might as well have them on !!
Resprayed the interior as well to the same Pearl Blue color.Upgraded the LCD unit to a 8" LCD with built-in Game,Calender etc.
To be honest, doing up two cars concurrently really is burning a big hole in my wallet :) . Anyway, will be looking into TC -ing my Toyota Wish. Its based on a MRS engine block 1ZZFE. ...
--Night Pics--
Pics of my Angel Eye + Euro Clear HeadLight Conversion(HID).
--26th June 2005-, Location :-Sepang F1 Circuit - JGTC. was an excellent trip and experience.
CrossDrilled Slotted Vented Disc & Stage3 6-puck Clutch.
..... and when it rains, I will just stay at home and Surf Net or perhaps have a few laps of GT....
Here is a consolidated list of mods on my miata.
-Full customized Turbo kit TD-04 w stainless plumbings - 1.0 bar /~14.2psi
-FMIC Front mount intercooler - Custom
-Greddy E-Manage with Full option Harnesses (ignition,pressure sensor etc etc)
-upgraded 430cc injectors
-Turbo XS BOV
-Customized 2.5 inch Exhaust system -- T.Manifold/2.5 inch Downpipe/4inch Tip/Stainless Steel Thro Muffler
-HKS 256 Degrees In/Ex Camshafts
-Full kit - Front/Side
-Aluminium wing - small
-Vented Bonnet
-FSE Fuel Reg with Fuel press gauge
-NGK Iridiums/Magnecor KV85 8.5mm Ign Cables (RED)
-Stage 3 6 puck sprung Clutch
-CrossDrilled/Slotted/Vented Disc Brakes
-Axxis Ultimates Brake Pads
-Apexi Turbo Timer
-Customized RHS Dual Pillar Gauge/Gauges
-K&N Filter
-OBX struct brace/Dual loop style bar
-Koni Yellow shocks
-17 inch by 7 with 205/40 GoodYear F1s
-25mm spacers - Rear / 8mm spacers - Front
-Naca Duct
-DIY TSIs
-Euro Clear Hdlights with Angel Eyes and HID conversion.
-Euro Clear Tail lights
-Customized Side markers (Aluminium)
-Pioneer Double Din FHP-5000 HeadUnit/MTX Thunder Amps/2xDoorSpeakers/2xKenwoodRearEnclosedConsole Speakers/2xSuperTweeters/1x8" LCD Scrn/1xPortableDVDPlayer
-etc etc other minor additions/mods
----------------------------------
UPDATED !! My LATEST Addition. Toyota Wish 1.8TypeX. Fitted with GIALLA Sportivo Full kit/Tinted TailLights/ Fabulous EyeLid,Garage Vary Valiant Spoiler, HKS SPF Intake System, Alutec Struct Bar, Garson Collection-White 310mm Aurora SWAROVSKI CRYSTAL Rear View Mirror,GARSON HANE,CUSTOM Curtain with Crystal embedded fasterners,GARSON NeckPillow,Garage Vary's Fender Flares,Red-colored Coded Engine Cover, Red Calipers etc
Here are some pics of the "FINALLY ARRIVED" GARSON SWAROVSKI Crystals Mirror - ( Large Size 310mm / Crystal Type Aurora / White Edition)
Beautifully packaged and presented. High quality Indeed.
This is the GARSON D,A,D, Collection AURORA SWAROVSKI CRYSTAL MIRROR - White Edition (310mm)
Some old pics . . . . .
Some Older Pics
MOMO TREK STEERING w Boss Kit and ISOTTA Gear Knob,Full Leather with Blue Thread Trimmings.Lenso 18by8J AD-1 Graphite Full Face Rims/Offset +38/ wrapped with 225/40/18 Yokohamas.
Custom Straight Through 2.5 inch Stainless Steel with 4.5inch Tailpipe resonator. K&N AirFilter ....
Interior :- Clarion VRX745 7inch TouchScreen Indash DVD system.Linking up with one RIGHT Side Sun Visor 8 inch TFT LCD Screen and one 12.1 inch Roof Mount Flip Down TFT LCD Screen with a Built-in Game unit.MTX Thunder Amps , Twin Subs etc... More to come...
This Red Miata was how it all looked like when I just got it. the only thing that I added then was a 17" Sports Rims. And then .. . . .
This is what it is today . . .
Customized Turbo / Customized Stainless steel Tubings / Turbo XS BOV etc . . .
Resprayed Interior trimmings and some minor Customizing work. Will be doing Full Leather Uphostery soon - Blue leather of course !
Added a pair of Canards to the lower front bumper.
Euro Angel Eyes Head Lights
A Day at the Dyno
Just got a new set of the adjustable Yellow Konis.
Some slightly older pics here. Enjoy
On page two , there are some new pics on my WagonR,Enjoy !
A nice pic of my cars in my carpark.
Here are some pics on the OBX Chromed Struct Brace
Thats my two blue rides.
Here are some of the Older Pics
250 degrees Intake/Exhaust Camshafts.
Did a 90 Degrees bend to duct in air away fr the Exhaust Manifold/Header.
This is a 1993 end 1.6L Miata. Jus got it a few months ago. Came in Red and was totally STOCK at that point of time.
First thing to be done was to cover it with a coat of Metallic Blue. Then followed by a set of 17" by 7J with 205/40 rubbers.
Subsequent Modifications/Additions :-
Exterior
-Front Lower Lip
-Side Skirts
-Custom GT Wing
-Rear Mud Guard
-Custom Bumper/Side Indicators - Silver
-17" by 7J with 205/40/17 Kumho Tyres
-Rear Tow Hook
Interior
-Isotta Modena Steering
-Custom Pillar Gauge
-Painted center dash and consoles.
-Autometer Gauges x 2
-Custom Silver/Blue Trimmings/Meters
-Leather Trimmings for Hand Brake/Gear Knob
-Racing Brake/Gear Knob
-7" TFT LCD Screen
-Panasonic VCD player
-Subwoofer and supertweeters custom into Doorpanels
-Amps/Equalizer
Engine/Others
-TD-04 Customized Turbo
-Turbo XS Blue Anodised BOV
-FSE Power boost valve
-Vortech Fuel Regulator
-Full Straight thro' Exhaust
-Open-Type Cone Filter
-Performance Intake/Exhaust (256 Degrees)Camshafts
-Magnecor KV85 Ignition Wires
-NGK Iridiums
-Silver/Red/Blue hoses-(Radiator & etc)
-Polished Engine Cover & etc
-Adjustable Yellow Koni absorbers
-HotBits Springs
-Wheel Spacers
-14 degrees advanced timing
Soon to come Mods/Upgrades
-Lightweight Alluminium Flywheel(Max5)
-Adjustable Fuel Regulator (AEM/WeaponR) -- Completed
-Adjustable Alluminium Cam Gears (HKS/TODA/AEM/Venom)
-Programmable ECU (FMII/MoTec)
-Full Leather Interior (Blue/Black)
-Euro Clear Tail lights -- Completed
-Left Eye-lid Intake -- Completed
-Some Xtra Bodywork Customizing on Front Bonnet for Cooling/Ventilation
More on Next Page . . . .
