Here's the mdf baffle that I carpeted using the oem material and the Arc Audio amps ![]()
That's a 1 farad Monster Cap in the middle.
Here's my plexiglass box built exactly to JL specs for my 12W7 gately audio
As you can see there's a mirrored backing so at angles you can see the magnet structure. It's too cool!
![]()
here's a better shot of the trunk. ![]()
Here's my SVR deep cycle battery that is slightly larger than stock. I got a positive battery terminal that had to hold the 3 stock wires. I had to add an 8 gauge for my 2100 and 4 gauge for my 1500DR. You can see the fuses on the side of the battery. I also had to wire a 10 gauge power wire straight to my deck because it draws so much current that it can't run off of in dash wires.![]()
Here's my Alpine 7875 that I installed without an installation kit. You'll notice that the empty tray is on top vs. the bottom. It's great this way since the Alpine actually tilts! You can also see the bass controller for my Arc 1500DR.![]()
These are the kicks that I bought from Ebay. They consist of MB Quarts mids and tweets. The woofers are in the stock door in which I made 1 inch mdf baffles to make them fit. The passenger side has the computer there so I moved it right on the floorboard instead. The hump is hardly noticeable.![]()
![]()
My 3 way Musicomp crossovers are installed under the passenger seat.
