my altima 2003 VQ35DE. mods:flywheel,eccm by tecnosquares inc,aem cold air,underdrive crank pully, 1200KG preasure plate and clutch disk,jim wolf cams& flywheel,stillin race head pipe, working on race headers!dyno wheel BHP 305. estimated crank BHP 357!california ET: 13.109 @111 MPH.Also waiting for a 150 wet shot of N.O.S.i will break intoo 11.sec i hope soon.this is my altima 2003 VQ35DE. Heads have been ported buy:Performance Machines, machine shop, 19059 Valley Blvd. Ste.#515 Bloomington,ca 92316. full match porting & polish on ports& chamber. total cost with valve job 4 angle. With jim wolf HD valve springs. Also titanium clips from farerra. B&M sport short throw shifter cost on all head work $450.00. 14 inches brake rotors from APG. also APG 4piston calipers in front, and 2 pistons in the rears. Dynoed BHP too the ground is now @ 367. and estimated crank BHP 417. also a 10 wire Blue grounding kit @ 4 guage wire. full race headers from XS Racing. fuel injectors from RC injectors. 55cc each two tip.D.A.D. springs 2 inch drop front & rears. i finally decided NOT too use N.O.S. after all with those Dynoed ###'s
