Welcome to the Rebirth Page
The Digital Designs Subs are HERE!
Yup I got a pair of DD 3512 D series subs, and these you have to solder the wires to.... Show more Below you can find pics of the subs as well as pics of the wire to be used.
Replaced the Concept CC-D1200 with a Concept CC-D2400, MORE POWER!!!! Also made a new port that is 60sq inches, where as the old ports were only 40sq inches. More port area=more SPL. Removed the 6.5's from the rear deck and sealed it off completely. Also added a Optima yellow top battery.
The concept amp is in!! Man does it make a HUGE difference! I have two shows this weekend so I will see what this baby can now do.
Alpine 12 Disc CD Changer installed, since the In-Dash CD player started skipping from the SPL.
Orion Cobalt 6.5 coaxials are installed as well as the Audio Control Line Driver.
Here you will find photos of my cars amps and subs as they are going through a rebirth phase. The subs are being upgraded to the Orion XTR Pro 12s. And for now the 600.4 amp will be used for mids and highs, as I will be adding a set of Orion Cobalt 6.5 coaxials in the rear deck. The new sub amp will be a Concept CC-D1200. Anyway, here are some preliminary photos of the box, most of the in progress pics are on a regular camera and I will have those developed soon. These are from my digital camera. So lets get to those pics!!
Here is the box laying the way it will be in the car, but with no subs and no ports yet. The ports will be built this weekend.
Here again is the box without the subs but facing up.
Here is the box with the subs just laying in it facing up.
Here is the box facing up but from another angle.
Here you are seeing the ports being built.
On the Left you can see the screws flushed to put it together. On the Right is just after the first sanding of the ports.
Here you see both ends sanded.
Ugh its raining, so I may not get to finish the box till tomorrow. Anyway, I filed and sanded down all the edges around the port faceplate and also did on the inner lip areas. Also primer painted them.
Now they are painted, gloss on the face and flat black inside, the ports look good, but I think after mounting the gloss is going to not look that great, so I am going to texture it and then paint it flat black as well. But here are some pics of them.
The BOX is DONE!!!!!!!
Its in the car, and my bandpass was a PAIN to take out, the ports for the bandpass are still in the car as I got too tired to take the time to remove them. But now I will just have little things left to do such as trim it out, and make it look a little more presentable. Anyway here are some new pics..
Ports in the box.
Box in the car, again a bit of cleaning up etc. will be done once the new amp for the subs is in.
The whole thing, yeah I know the wires look like crap, but that will all change once the new amp is put in.
Here is the amp, yes wires still look like crap.
Here is a diagram of my system after upgrading my subs and getting the Concept CC-D1200 amp adding a line driver and 12 Disc CD Changer to the system.
I create these diagrams for people click HERE to find out about them.
Here is the new Concept amp CC-D2400 amp was placed in the trunk do to its size and to move the box as far forward as possible.
Here is the new optima yellow top battery.
Here is the current port set up, the larger ones didnt work well.
Here are the new 3512s from the top!
Here is one of the subs from the side! Look at the size of that motor structure!
And here is one up and one down!
Here are the wires ready to be soldered to the subs connections, if you have soldered before you know that soldering 8 gauge wire is NOT easy!
Here they are after soldering the 8 gauge to the leads.
And close ups.
Thanks for taking a look, check back soon as updates are moving fast!!
XtremeHonda Show Less