It fits, but one tool I was missing for this installation was a 9/16"drill bit for the forward mounting holes. The hitch came with a spring and wire to ... Show morebe used for threading bolts through blind holes, as a van has unibody construction and the frame rails are practically inaccessible. So I will have to continue this project on another day.--------------------------------------------------------------------------------------I haven't really paid any attention to the van's drivetrain... To this point, I've only had to look after the requirements for the Out-of-Province inspection. In the next few days, I'll have to freshen up the fluids and check the tranny. I don't even know if I have a tranny cooler on the van, but I suspect there is. --------------------------------------------------------------------------------------In October, I put it to the test, and it was a rough trip... not because of the hitch, but the van ran terribly! I messed with the timing, as I had no power under load. I ended up staying the night at a truck stop half way, to figure the whole mess out. It didn't help that I never repaired the missing vacuum lines from the day I got the van... it ran okay... but when I went to check the timing, I found that the rubber fuel line feeding the pump was badly ruptured! Show Less
