The the car before disassemble, I was looking for the nuts and screws for do it... This is a comparison, the stock light (left) and my new galaxy white light... Show more (right), at this pic, you will not notice difference, but it is very very different. The stock is a yellow light and the new is a very very white light. I bought at BrainStorm. This is at my house, the front nose type II from Racing Beat, very very good quality, I don't have seen a good fibre like this, Only one thing, you must redo some holes to fit the front noseIt's looks like plastic. You can see the proyect manager "MISSI" reading very carefully the shipping notes. i bought to Flying in Miata...Thanks Tamy MISSI again testing the packing quality. The Front nose without packing The car disassembled, just before start paint it. This is the real hard job. I choose a Lamboghini orange paint, 0058 Arancio Atlas Mica. It is a very complicated paint because is a 3 layer paint, first a cream base paint, later a orange color, it is a Ink not a paint so you must be very carefully, and them the clear. At this pic you can see my father cleaning the engine.Me, painting at my "super-paintshop", You can see my father's car behing, Opel calibra 2.0The wheels, Kosey K1 Racing, I see that USA model is different to Europe model, This is at Dark Grey, great for the orange paint, gives a racing touch.I bought it to a local shop.246 Euros for each wheel and 105 euros for each tyre. Show Less
Before and After
PLEASE FOR MORE INFORMATION YOU CAN VISIT WWW.MX5PASION.COM
You can also visit RUSH WORKSfor more information or questions
Hi, My name is R... Show moreaul,and live in Spain.
I like the miata since he was born.
Now, I can buy one and I did it at june 2003, I buyed a miata 1.6L '91 American Model with, airbag, A/C, power-windows, power-stering, cruise control, alarm, power-antenna, hard top and 100.000 milles.
But I like the look of some American Miatas and I want one like this.
I want do all by myself, no workshops or paint shops if I can do it, I only must when to the workshop to install the rollbars.
At first I was looking for all information I can get...I want give thank to many people who help me many times:
-FLY IN MIATA
THANKS FOR ALL. I can not do without you.
And I want give thanks for two special persons, my father and my mother, If they don't help me i can not did it.
Ok, this is my miata when I buyed
and this is the list of parts I installed on my miata,
-Greedy turbo kit
-Mitsubishi Starion Intercooler
-HKS SSBOV (Super Secuencial Blow Off Valve)
-Wabro 255 intank fuel pump
-FM heat shield
-MSD ingnition retard
-Mx6 turbo injectors (320 cc)
-RX7 Air Flow Mass
-KN Air flow Filter
-Sard Racing fuel pressure Regulator limiter edition.
-3" Enthuza turbo exhaust
-FM Hiflow cat
-Custom Cu radiator(x4 size)
-0.8 Magnecor spark plug
-Greddy Profec A boost control
-Apexi SAFC2 (super air fuel converter)
-Kayaba AGX shocks
-Eibach pro kit springs -30mm
-Brainstom Subchassis braces
-Kosey Racing R1 wheels(6 kg)
-Toyo T1-S 205/40/17 tires
-1.8 miata differential
-1.8 miata axles
-Exedy Ram Clunch
-Wilwood Big Brake Kit (290 mm rotors and dinalyte 4 pistons calipers )
-Brembo rear rotors with green ECB pads
-Racing Beat Nose type II
-Simpson Design hood
-Hard Dog Roll Bar
-Cloth top with heater glass
-Lamborghini orange paint
-Autometer Gauges, boost and air/fuel ratio
-Voodoo Handbrake and Gearknob
-Central locking kit
-Remote lift trunk
-Clarion Radio-Cd 51wx4
-Vieta 225W front speakers
-60W Kenwood headrest speakers
This is my roll bars like 60's AC COBRA's
Here "the 3 amigos", My car(white) when arrived to my "High-tech workshop", the other two cars are from Rafa Garrardo (NB2 Phoenix)and Juan Rojas (NB Special-version), a good friends... Show Less