I have been working on my fiberglass doors for nearly 2 months. I wanted something I had never seen before that I knew would be an eyecatcher. So I removed... Show more all the window controls from all 4 doors, and since I am shaven on the outside I went ahead and shaved my door handles on the inside. As well I went ahead and built speaker pods on the 2 front doors.
Like I said it took 2 months to do these myself. I can't even figure how many hours went into sanding these. There is 3 layers of fiberglass on each, plus alot of bondo. The doors now way about 10lbs each.
When I was done with the sanding I took them to get painted. I decided on using the same paint as I did on the outside of the car(pearl).
I was unsure how they were going to turn out, but when I went to go and pick them up I was amazed. Show Less
Now that I have it clean shaven and painted time to work inside. I decided to just rip everything out. When autoloc was installed I wasn't completely i... Show morempressed with the wiring, so I ripped it all out and did it myself. I went with Autoloc 10 channel, meaning I have 10 functions I can do. Since all the carpet was out and all the seats gone I decided to go ahead and prewire the other doors and the other accessories. With everything wired up it was still a mess, so I decided on something else. Why not dynomat everything down, so I did.
I put in 4 bulk packs of Dynomat extreme.
After Nopi 2004 I came home and ripped the entire back seat setup i had out and restarted. It was similiar in ways but I now had to add things to the design due to picking up 4 sponsors (Boswtick, Batcap Xstatic, Optima, Katzkin) So with some careful planning this is what I came up.
And this is what it looks like when i vinyled it. I actually vinyled it in white vinyl and the dyed it to match the dash.
As you can tell by the pics I have 3 amps, 2 Yellow Top Batteries and 2 Batcap 400's. I have a battery isolator inline with the batteries. I used Stinger Expert for all wiring.
While I had everything pulled out of the car I went ahead and painted every plastic piece in the car blue, as well I was able to install my Katzkin seats. Show Less