I picked up this former Aramark(uniform service) truck at auction for about $500. It is a 1991 GMC P-30HD w/Cummins 4BT, SM456, 14B w/4.11. It has a leaf spr... Show moreung solid beam front axle, and 19.5 wheels.
The truck did not run and the motor had the head off. I am currently removing the 4BT and replacing it with a carbed 350. The 4BT will be refurbished and used in my 4x4 Suburbillac. (see FURESCALADE when its posted)
The 350 is a 89 truck block with basically stock bottom end using .030 over TRW pistons, stock rods and crank. It was assembled using Clevite bearings, ARP main and rod bolts, and Federal Mogul gaskets. The valvetrain consists of Comp 12-231-2 cam, lifters, pushrods, rockers, springs, and locks. The heads are stock using stock valves. Intake is a dual plane Edelbrock, carb is a Spread bore Holley. Exhaust is Headman full tube, to 2.5" aluminized w/3 chamber Flowmasters, and side exit tips
Here is my father removing the "Tennessee Fire and Safety" vinyl lettering. He much like the lettering is a PITA to remove. But at least the lettering will be replaced according to my wishes. Show Less