5.0L 5-Speed, ported throttle body, throttle body spacer, injector spacer, 14x3 open air, Hedman headers, DynoMax 2.5" cat-back, 2.5" cutout, emiss... Show moreions equipment deleted, custom chip.
I got 14.3 @97mph on the 305
This was the car when I first got it and I did much more to it over the years hell it hade a 400hp 327 SBC for about 6 months and then I ran out of $$$ and Patience so I started to part it out .
page 2= LT-GUN Show Less
The car sat for almost 2 years without a motor, transmission or a windshield so rain, rats and dust destroyed everything. So I cleaned and pa... Show moreinted for a few months and now I can get started on the drive train
So now for the engine I start with a 1994 Chevy iron head LT-1 10:1 comp
Ported and polished the heads and put 2.02 and 1.60 valves in it I put about 30hours in the port work
Complete form the machine shop
For the cam and valvetrain I went with a comp XR269HR-12 108 center line 112 lobe sep 218 and 224 @.05 duration lift .495 .503 but it will be much grater since I?m using 1.6 roller rockers. For the spring I used come 325lb SBC
Intake using port matched factory lt1 manifold with 30lb injectors and a twin 58mm throttle body
January I will be looking to get a t-56
February get the motor and tranny in Show Less