This is a special under drive pully designed to work with the the G-Force 4.93 gear set (next photo)so that the alternator and other belt driven items are dr... Show moreiven at normal stock speeds.
This is the G-Force gear set with chain. I give the car 4.93 ratio vs 3.66 for the stock M and 3.89 for the Special M. It give the car a 26% power increase.
This is a 160 deg. thermostat to replace the 180 deg. stock unit. Show Less
This is my ride. A 1999 (mostly) Chrysler 300M that I have made a lot of changes (over 120) too. I made the hood scoop (functional) along with the clear tu... Show morern signals. My insperation has been the 300F, and Maybach.
This is my Dash. I added Digital Surround contols to the roof along with Air ride pressure guages (Both have since been changed with my new overhead console) and shows my head units with screens. The center dash has and Alpine D900 DVD/AM/FM/XM/motorized screen show my XM, Navigation, DVD vidio, forward camera, and rear camera views. I also have the RB-1 Nav/AM/FM/Sirus/6DVD changer setup for the rear passangers.
This is my 2 2 seating for the rear. The refrig, can be changed out quickly with my other rear lower console. The seats are motorized. (I have a picture of the other option in my Interior page).
This is my intake system. It channels air from the hood scoop to a air box, which holds a 7" S&B cone filter. I wanted at least 13.25 cu inches of air flow to the Throttle body. So all duct work is 2" by 8" or 4" diameter, instead of the 10" ci in the stock system. Not to mention it is also under pressure.
Shows my dual exhausts, with clear third brake light/rear vidio camera. I shaved most of the emblems, along with side molding and emblems. The front fender emblem is a side marker light. The "M" lights up, with the use of an LED light.
This is my new billet grille, the lower one will be recessed more. The Headlamps are from a 03 Special that have HID low beams, I have added HID hi beams along with a front vidio camera (lower left). The front clear turn signal lenses I made, I also ground down the fog light cap to allow more side light (for cornering), and changed the bulbs to 80 watt.
Page 2 Exterior Mods
Page 3 Interior Mods
Page 4 Performance Mods. Show Less
Shaved moldings...............Shaved "Chrysler"
"300M side marker lights..Emblems
Billet grilles.......................... Show more...Hood scoop (functional)
Mud flaps.............................Special rear view mirrors
Rear wing.............................LED 3rd brake light bar
Rear vidio camera..............Front vidio camera
Wiper blades.......................Special HID headlights
Clear lens turn signals......HID hi beam conversion
2001 tail lights.....................Rewired tail lights
Hood scoop turn signals...Rear backup system
This is the rear, I changed out the third brake light lens to clear, and added 91 LED's to light it up.
The rear wing has a 15.5" LED bar for the brake light also.
I added the 01 style of tail lights, changed out the stock lenses to clear lenses, and rewired them so all have breaking light intensity. I used twoer LED's to light them up. In the center I used "switchbacks" which light up white when in reverse, and change to amber when the turn signals are used.
I also added a rear back up system that worns me if I get too close to an object. The system uses a LCD/audio display inside to let me know the status.
I removed the "Chrysler" lettering and moved the "300M" emblem over the lock. The camera can be viewed from any of my interior monitors, and has a 95 deg angle of view. The camera lens is in the hole in the center "0".
I installed Borla Tips.
I have since added Clear tail light lenses, and LED's. The top is now the running/brake lights. The center is now my backup and turn signals. I used amber/white LED "switchback bulbs" to acheave this. the bottom three are still my running/brake lights. I also added an electronic flasher that has adjustable patterns and speed.
This is the side marker lights. There is a LED that lights up the "300M" logo.
This is the clear front trun signal lights that i maked. Didn't want the reflectors, but had to make the legal.
This shows the front vidio camera (8 o:clock from the HID projector) and the HID Hi beam capsule.
These are my newly designed headlights. They still have the HID Hi and Low beams, but I added a LED "brow" light bar. I also added Angel Eyes (Halo's) to both the hi and low beams. I moved the camera's location beside the fog light. Show Less