Last 3 messages of 5

02spectratypek: Group Bulletin from KDM (Hyundai, Kia, Daewoo)Guys: Wow guys, you all are still dead and haven't posted any thing just yet? help me out peeps. Albi...

goolz: o yea and make sure that you have the flat bar goin from front to back also have a peice on each end of that welded from side to side for good foundation and make sure all the peices you cut off your old seats are flat well the two front peices i mean the back right on the drivers and the back seft on the passangers has to be grinded on the side and bent down to make lvl if your messurements arent right the seat will be a hard squese and might not fit so you got any more questions ill try to make them simple as posable sry so complicated lol...

goolz: yea ok well you have to make brakets the way to do it is messuare your sliders from side to side front to back then meassure the holes where your stock seat was sitting after you have everything meassured out go by some flat bar from home depot or lowes you have to cut it and stuff to fit from front to back o yea you also have to grind off the little bottom pieces of your stock seats where the brackets bolt in to the car and weld them on to the flat bar all this sounds really complicated i know and its about 4 hours of work but if you go on to andysautosport.com you can buy what im tellin you to make but its like 220 dollars so the best thing to do is get some flat bar and find someone who knows how to grind and weld and then make sure your meassurements are right and after that you can most likely figure it out because ive probly already confused you im just sayin its not easy...

View/Sign Guestbook