Sign My Guestbook
Posted by 350rsproject
07/12/2008, 10:45pm
I am actually in Maryland Heights not far from Lambert Airport.
Posted by fixdaserver
05/07/2008, 07:29am
The old motor is sitting on my garage floor and I'll probably sell it cheap or make a winter project out of it. Took it out running but the top end was making noise, needs lifters and valves and it was leaking from every gasket. I bought the new motor from a local Nashville builder, should be able to fire it up this weekend. Fixdaserver, "Old skool" Steve.
Posted by DAVIDJRBRADSHAW
04/13/2008, 04:22pm
I got the hood from summitracing.com but i found one on ebay that looks the same but its carbon fiber they are about the same price i think im goin to do my plate like your thanks for the idea
Posted by roxxychiickx3
04/07/2008, 09:56am
im from bridgeton, sorry i didnt write back sooner i didnt u i had messages lol
Posted by 19660427
03/20/2008, 07:17pm
Don't worry about having to take your time building your ride up. Hell, it's taken me 41 years to get where I'm at. I look forward to the sound clip later. Great gas mileage. Wish I could get half that!! G
Posted by phillherup3
02/28/2008, 07:02pm
hey man check out the truck i got all the new goodies installed. i don't have any good pics of the sub mostly because i'm waitin til this summer when i have the time to build a nice custom box and prolly get a second sub too.
Posted by OrangeKrate
02/18/2008, 11:16am
Hey Bro, thanks so much for the kind words. Make sur eyou pick a good Chrome guy if you're getting the roll bar chromed. Mine has been done twice now and it has to be done again. So be ware. I was hinking about getting mine powercoated Orange. What do you think?
Bud
Bud
Posted by TANGELO_SS
02/08/2008, 06:32pm
thanks for the post, I got 4-295/35/18 tires used for $125.00 and when I got them mounted on the wheels at the local wheel shop I had them look up how much they were new and they where around $300 a tire. So I would say I found a steal
Posted by ThunderShred
02/07/2008, 12:17pm
Great color indeed!
I like the wheels you've chosen. Should be fancy once they're on. I can't say I've seen any good body kits for these Camaros - I think their lines are near perfect as is.
Look into BMR Fabrication (www.bmrfabrication.com) for any suspension/chassis parts you have expressed interest in. They make good stuff.
I like the wheels you've chosen. Should be fancy once they're on. I can't say I've seen any good body kits for these Camaros - I think their lines are near perfect as is.
Look into BMR Fabrication (www.bmrfabrication.com) for any suspension/chassis parts you have expressed interest in. They make good stuff.
Posted by GinoSTANG
02/02/2008, 11:14am
Even though I'm a Packers fan I'm going with the Giants cuz I can't stand the Pats. Enjoy the game man, don't party 2 hard on Sunday..lol.. Later, Gino
Posted by roxxychiickx3
01/31/2008, 09:07pm
yea i prob wont get them cuz i wont be able to see but they look really good. I havent seen another purple camaro around here neither.
Posted by GinoSTANG
01/29/2008, 01:54pm
Hey man sorry for the delay things have been real busy lately. How r u and the Camaro doin? Like the additions 2 ur page and the mods too. With the rims thatz definately a though 1 if it were me(only my opinion, don't let me influence u either way, I don't think u can go wrong) I think the High Polish (the ones 2 the right) would look great on the Camaro. Can't wait 2 c, its gonna look hot either way. Well the stang is parked until this winter weather is over(maybe in another month I can get it out). I didn't really do any mods but I'm lookin at some stuff from Fluidyne, so we'll c. Who u got for the big game this weekend? I apologize cuz haven't been on AIM in the long time (maybe once in the last month) but now that things r less busy I should b on my screenname is ginostang (same thing as on here). Hope 2 hear from u, Take care, Gino
Posted by coldblade1985
01/29/2008, 01:26pm
Hey, thx for the compliments =) The rims I have, surprisingly are 16x9. The car being lowered accents the rims a little more that way! As for the rims your deciding on getting, I personally like the design on the left. but for size, and thinking of lowering your car, I'm not too sure if you'll need to do some fabricating to get them to fit. The choice is yours ultimately though. Nice Ride =)
Posted by Z282011
01/28/2008, 06:49pm
Hey, thanks for the link, and yeah its particle board, now i'll just have to figure out the dimensions of my box, and i guess try to seal it, the wiring is right i'm almost certain.
Posted by Chef-Gee
01/28/2008, 09:47am
Hi Jayme, thanks for your comment and rating on my Vette! It is in very good shape though!I Love it!Your Ride is sweet too! Hi 5 ! Keep it up!Regards. Gee
Posted by Z282011
01/25/2008, 01:30pm
Alright thanks for doin this for me, the subs are rockford fosgate p2 Punch 12's, and i know i sound dumb, but i can't remember what u call this, but its not plain wood, its the little pieces packed together if that tells you anything.
Posted by 2002LS1Custom
01/25/2008, 10:32am
Thank you very much, you have a nice looking ride as well. Keep up the good work. If you need the spoiler or hood let me know. Jordan, Street Trends 760-929-4747
Posted by BAJA_DUNERS
01/24/2008, 07:02pm
Hi bro.. thanks for your comment i appreciate.
about yours rims i found this ones look very similars like yours OEM. Are from : www.acealloywheel.com model number C813
are for CORVETE but i think will fit the Chevrolet offset.
Any way.. See a and good luck in college.
Bro.. you should post some babes from you college jejej XD
ADIOS!
about yours rims i found this ones look very similars like yours OEM. Are from : www.acealloywheel.com model number C813
are for CORVETE but i think will fit the Chevrolet offset.
Any way.. See a and good luck in college.
Bro.. you should post some babes from you college jejej XD
ADIOS!
Posted by josh8082002
01/21/2008, 10:17am
i loved the nitrous purge it was cool but you got any big plans for it?
